There are a number of examples of the removal of characters from a string which utilize nested SUBSTITUTE or REPLACE functions. However, they are hard-coded in that the formulas are built with a set number of characters to remove based on the times that the SUBSTITUTE function is used. The formula methodology I am presenting here is more flexible and robust than previous solutions.

In this example, I am trying to remove all punctuation from a string, specifically the one shown below from cell A1. You will note that this string contains five different punctuation symbols, several occurring more than once.

x,da.”xyz”.c?e!

The following array formula removes those symbols

=TEXTJOIN(“”,TRUE,IF(ISERROR(MATCH(MID(A1,ROW(INDIRECT(“1:”&LEN(A1))),1),{“,”;”.”;”?”;”!”;””””},0)),MID(A1,ROW(INDIRECT(“1:”&LEN(A1))),1),””))

and affords the desired string shown below.

xdaxyzce

HTH!

Filed under: Excel, Other, TEXTJOIN ]]>

rng is a defined name range on the worksheet with each cell containing delimited strings. Although it does not necessarily have to be a 1-column list, most examples of delimited strings in a range are of this type. To convert this range to an array, use the following formula.

Define arr as =ArrayFromCDS(TEXTJOIN(“,”,,rng))

where the VBA UDF is shown below.

Function ArrayFromCDS(MyString As String)

ArrayFromCDS = Split(MyString, “,”)

End Function

So, arr is a 1-D array of all of the delimited values from each cell of the range. Then, use this formula

=INDEX(arr,MODE(MATCH(arr,arr,0)))

to return the most frequent item.

Filed under: Excel, TEXTJOIN, VBA ]]>

**Per an Oz Du Soleil post on how to separate 5 area codes in a single 15 character string with line breaks using Power Query**

**https://m.youtube.com/watch?v=yorGlCrfqY0**__ __

here is a way to do the same thing using a worksheet formula.

With the string in cell A1. Enter the following array formula in a cell.

=TEXTJOIN(CHAR(10),,MID(A1,{1,4,7,10,13},3))

Make sure that you select word wrap enabled for the cell containing the formula.

Filed under: Excel, TEXTJOIN ]]>

=NOT(ISERROR(MATCH(TRUE,CODE(MID(A1,ROW(OFFSET($A$1,,,LEN($A$1))),1))*2=CODE(MID(A1&”°”,ROW(OFFSET($A$1,,,LEN($A$1))),1))+CODE(MID(A1&”°”,ROW(OFFSET($A$2,,,LEN($A$1))),1)),0))) CSE

Filed under: Excel ]]>

Disclaimer: You need the Excel version included in Office 365 for this technique to work.

The insertion of icons in Excel 2016 is accomplished from the ribbon by selecting Insert, Icons. There are a number of catagories to select from, as shown in ths figure.

However, recently I have been interested (obsessed?) with worksheet UDFs and their ability to invoke actions or shapes. In this case, I wanted to see if a UDF would insert an icon into the worksheet. This is the VBA function I made with help of the macro recorder. Place this in a general module in your worksheet.

Function MakeIcon(fName As String)

iString = “https://hubblecontent.osi.office.net/ContentSVC/Content/Download?provider=MicrosoftIcon&

fileName=” & fName & “.svg”

ActiveSheet.Pictures.Insert iString

End Function

Now, enter the formula =MakeIcon(“Man”) in cell A1 and you will get the following result.

Unfortunately, there are several inherent Excel limitations that prevent the full utilization of this function. First, you have to know the correct name of the icon to produce it. It would be nice if Microsoft provided a list of the icon names, but I could not locate one. Then, I tried to get names by macro recording the insertion of multiple icons, but only the “last” selected icon URL is recorded. Even so, I hope that this technique is useful to you.

The example file can be downloaded here.

Filed under: Excel, VBA, web ]]>

I recently published an article about getting information on the latest earthquake of magnitude 5 or greater.

Please read this article to see how the core model was constructed.

One problem with this model is that since Excel’s web functions are non-volatile, a formula containing those functions must be recalculated by reentering the formula. I decided that an easier way was needed to trigger an update. I also recently published an article which utilized the hyperlink rollover technique.

I figured that this might be a good way to trigger a recalculation. And, since I was going to use a VBA function to be called from the hyperlink formula, I thought that adding audio functionality would be useful as well. Here is the hyperlink rollover formula used (in cell D5, named Recalculate). Since a rollover is required, the technique is not truly realtime.

=IFERROR(HYPERLINK(EarthQuakeAlert(),”Recalculate”),”Recalculate”)

And, here is the VBA function called by “rolling over” (passing the cursor over) that cell.

Function EarthQuakeAlert(Optional Person As String = “Him”, _

Optional Rate As Long = 1, Optional Volume As Long = 80)

Static xlApp As New Excel.Application

Dim Voc As SpeechLib.SpVoice

Set Voc = New SpVoice

Dim sAddress As String

‘Application.Volatile True

xlApp.CalculateFull

If Range(“d1”).Value = Range(“b3”).Value Then

MsgBox “No new earthquake > 5.0”

Else

With Voc

If Person = “Him” Then

Set .voice = .GetVoices.Item(0) ‘male

ElseIf Person = “Her” Then

Set .voice = .GetVoices.Item(1) ‘female

Else

End If

.Rate = Rate

.Volume = Volume

.Speak “New Earthquake Alert! ” & Range(“b5”).Value

End With

Range(“d1”).Value = Range(“b3”).Value

End If

EarthQuakeAlert = “Recalculate”

Set xlApp = Nothing

End Function

In order to use SpeechLib.SpVoice in the code, the correct reference (from Tools, References) must be added to the VBE as shown in the following figure.

In this figure is a picture of the earthquake model.

I hope that you find this useful. You can download the file here.

Filed under: Excel, hyperlink, VBA ]]>

I recently published this article about the direction and distance of a tropical system from an address.

Go back and read this article to understand the first part of the model associated with the address (entered manually in cell B1).

Originally I wanted to include the abilty to add the storm coordinates from an internet source but I could not find one, so manually entering them was necessary. However, later I stumbled across just the xml source I was looking for from the National Hurricane Center site at NOAA. It only gives the current information on a storm, so it gets “stepped on” with each new advisory. This information is for storm number 15 for the 2017 Altantic hurricane season, which hhappens to be Maria.

http://www.nhc.noaa.gov/storm_graphics/AT15/atcf-al152017.xml

In order to access more than one system, I replaced the number with a defined name function called StormNum, which is then used as the URL in the WEBSERVICE function to return the desired xml document.

=WEBSERVICE(“http://www.nhc.noaa.gov/storm_graphics/AT”&StormNum&”/atcf-al”&StormNum&”2017.xml”)

I also needed a list of the storms for 2017. One complication was that the NHC now gives Potential Tropical Cyclones a number like those given to all tropical lows. Then, if the PTC does not develop into a low pressure system, it will not show up in online lists, like for example, Wikipedia. However, I was able to find a site that did include PTCs and I used Power Query to get the table containing the desired information (see worksheet SysNames). I massaged the column containing the storm designations as shown in column G. The formula used for this is =IF(PROPER(TRIM(RIGHT(SUBSTITUTE(A3,” “,REPT(” “,100)),100)))=””,”Not Yet”,PROPER(TRIM(RIGHT(SUBSTITUTE(A3,” “,REPT(” “,100)),100)))). Shown below:

The source from the PQ M code is:

=Web.Page(Web.Contents(“http://www.theweatherguys.com/index.php?config=&forecast=tropsystems&alt=tropallsystems”))

Now that I had the list of storms, I was able to construct the StormNum defined name formula as follows:

=IF(Storm_Number<10,”0″&Storm_Number,Storm_Number)

where Storm_Number =MATCH(DirectionCalc!$B$2,Storm_List,0). Cell B2 contains a data validation list with the storm names derived from the PQ.

Now, the FILTERXML function can extract various pieces of information from the xml doucment defined as Storm, as shown in the following figure.

For example, the storm latitude (in cell C4) is =FILTERXML(Storm,”//centerLocLatitude”).

The final formula for the storm message is:

=ROUND(Distance,0)&” miles “&TextDirection&” of “&Address&”, moving “&MID(FILTERXML(Storm,”//systemDirectionOfMotion”),1,FIND(“OR”,FILTERXML(Storm,”//systemDirectionOfMotion”))-1)&”at “&FILTERXML(Storm,”//systemSpeedMph”)&” mph.”

Remember, do no use this model in any corporate or commercial manner (only for personal use).

You can download the file here.

Filed under: Excel, M Code, web ]]>

Filed under: charting, conditional formatting, Excel, filtering, hyperlink, Json, M Code, Other, Pivot Table, Power BI, PowerPivot DAX, TEXTJOIN, VBA ]]>

The Hyperlink Rollover technique was discovered by Jordan Goldmeier. It uses the HYPERLINK function with a VBA function procedure as the 1^{st} argument. By passing the cursor over the cell containing this formula, the function procedure is run. See:

http://optionexplicitvba.blogspot.com/2011/04/rollover-b8-ov1.html

And, this function, unlike normal UDFs, can modify the Excel worksheet.

I have been trying for quite some time to develop a way to highlight (format) cells in a list that contain words. It turns out that there is a bug (feature?) in the VBA expression Application.CheckSpelling that prevents its use in an UDF. For example, if I wanted to conditionally format cell A1 to highlight a string that is a word, you might expect that the following UDF could be used as a CF formula.

Function IsWord(WordRange As Range)

IsWord = Application.CheckSpelling(WordRange)

End Function

Well, it does not work. The problem is documented at the following link.

https://stackoverflow.com/questions/10776191/spellcheck-a-single-word-in-excel-function

I tried numerous methods to find something that would work. I won’t bore you with the details, but I used a lot of time on this without success. I even used the Hyperlink Rollover method, and it still did not work. Finally, in the last comment in the link shown above, I found that an early binding process was needed. When added to the regular UDF for use in conditional formatting, it still did not work, but it did work with Hyperlink Rollover. Here is the UDF developed to highlight words:

Function IsWord(WordRange As Range)

Static xlApp As New Excel.Application

For Each cRange In WordRange

If xlApp.CheckSpelling(cRange) Then

With cRange.Font

.Color = -16776961

.Bold = True

End With

End If

Next

IsWord = 0

Set xlApp = Nothing

End Function

By using this UDF with this technique, the following formula entered In cell D1 creates the Hyperlink Rollover location.

=IFERROR(HYPERLINK(IsWord(A1:A20),”Format Words”),”Format Words”)

After passing the cursor over this cell, the result can be viewed in the following figure.

I decided to add another word to that range in cell A9. Without “rolling over”, this cell now showed that A9 contained a word.

I was rather amazed by this. I could not find an example of this in any previous Hyperlink Rollover, but I might have missed seeing it. What I believe is occurring is that any change in the range used in the IsWord function serves as the same action as a rollover. I did verify that this condition persists even after the workbook is closed and reopened.

So…

I decided to use a dynamic range as the argument in the IsWord function, as shown below.

=IFERROR(HYPERLINK(IsWord(OFFSET(A1,,,COUNTA(A:A),)),”Format Words”),”Format Words”)

By adding several more cells with strings, the figure below shows the results.

I hope that you find this technique useful.

You can download the example file here.

Filed under: Excel, hyperlink ]]>

Note: It is important to note that this Excel model can be used any place in the world to look at the direction from storms or any other event.

The destructive nature of hurricanes has been dominating the news recently in the Atlantic basin. But, many times it is difficult to get information about how far a storm is from your specific location. This excellent Excel technique will allow you to answer that question. All that you will need is your address (or an address of interest) and the current storm coordinates. Key parts of this technique were found at the following links.

https://www.mrexcel.com/forum/excel-questions/541185-convert-number-deg-direction-text-n-nne.html

In the worbook provided, enter your address information in cell B1and the storm coordinates in C4 and D4. The formulas used to calculate your result are:

LocationXML =WEBSERVICE(“http://maps.googleapis.com/maps/api/geocode/xml?address=”&Address&”+,+&sensor=false”)

Lat_1 =FILTERXML(LocationXML,”//result/geometry/location/lat”)

Lng_1=FILTERXML(LocationXML,”//result/geometry/location/lng”)

Distance=ACOS(SIN(Latitude_1*PI_DIV180)*SIN(Latitude_2*PI_DIV180)+COS(Latitude_1*PI_DIV180)*COS(Latitude_2*PI_DIV180)*COS((Longitude_2*PI_DIV180)-(Longitude_1*PI_DIV180)))*3959

PI_DIV180=PI()/180

Direction =DEGREES(ATAN2(COS(RADIANS(Latitude_1))*SIN(RADIANS(Latitude_2))-SIN(RADIANS(Latitude_1))*COS(RADIANS(Latitude_2))*COS(RADIANS(Longitude_2-Longitude_1)),SIN(RADIANS(Longitude_2-Longitude_1))*COS(RADIANS(Latitude_2))))

TextDirection=CHOOSE(1+ROUND(IF(Direction<0,360+Direction,Direction)/22.5,0),”N”,”NNE”,”NE”,”ENE”,”E”,”ESE”,”SE”,”SSE”,”S”,”SSW”,”SW”,”WSW”,”W”,”WNW”,”NW”,”NNW”,”N”)

The final formula for displaying the desired information (in cell A7) is:

=ROUND(Distance,0)&” miles “&TextDirection&” of “&Address

The result can be viewed here.

I hope that you find this useful. Download the example file:

Filed under: Excel ]]>

For this technique, I am building it on the workbook made for the following article. Please download the example file and read the article, since the functionality is synergistic with it.

When viewing a control chart, it is useful to be able to view only data within set control limits. For example, you would like to view all data within one sigma of the mean. The technique described here allows you to do that for 1, 2, or 3 sigma. The key to accomplish this is Excel’s advanced data filter. The advanced filter uses a boolean formula to filter a table of data, starting at the first row of the table. The formula in A2 gives the desired result.

=AND(B6<CHOOSE(SigmaKeep,D6,E6,F6),B6>CHOOSE(SigmaKeep,G6,H6,I6))

where SigmaKeep is a worksheet cell (G2) with a data validation list of 1,2,3. Cells D6 and G6 (and the corresponding columns) contain formulas that calculate the +1 and -1 sigma from the mean for the data in column B. The 2^{nd} and 3^{rd} sigma are for E6,H6 and F6,I6 respectively. The following figure shows the advanced filter dialog box and the input ranges required, where SigmaKeep is set at a value of 2.

After the filter is applied, note the difference in the data in the control chart versus the original in the first figure.

The only caveat to this technique is that the advanced filter has to be cleared (Data, Sort & Filter, Clear) before a different KeepSigma value can be applied. This can be used in conjunction with the removal of outliers as discussed in the original article.

The example file can be downloaded here.

Filed under: charting, Excel, filtering ]]>

In this article,

http://dailydoseofexcel.com/archives/2017/07/10/look-ma-no-powerpivot/

Jeff Weir pointed to a video made by Mike Girvin about adding measures to non-PowerPivot versions of Excel (link below)

https://www.youtube.com/watch?v=FVVK-8QZC1M&t=422s

Mike demonstrated how measures can be added to a data model in these “disabled” version through pivot table options. Please view this video to see how Mike did it.

The link to the working file for this video will be referred to in this article (Thanks, Mike!).

https://people.highline.edu/mgirvin/YouTubeExcelIsFun/EMT1269Finished.xlsx

You can download this file and reproduce the technique presented here.

Although it is not well-known, Microsoft started at Excel version 2016 (Office 365) marketing versions that do not have PowerPivot capability. For details on this, see:

So, this article is dedicated to those who purchased non-PowerPivot versions of Excel 2016, although the technique presented here will work on any version of Excel 2013 or greater.

Jeff Weir mentioned in his article that since some Excel 2016 versions did not have the full-blown PowerPivot capability, and that VBA could be used to build a user interface to the data model. Well, I have not created a UI, but I have made a way to add multiple measures to the data model using an user-defined function. The code for the VBA function is shown below. To use this, add astandard module in the VBE and then save the workbook as .xlsm. Then, copy/paste the code into the module.

Function AddMeasure(TableName As String, MeasureName As Range)

Application.Volatile False

With ActiveWorkbook.Model

For Each mCell In MeasureName

mFormat = mCell.Offset(0, 2).Value

.ModelMeasures.Add mCell.Value, .ModelTables(TableName), mCell.Offset(0, 1).Value, _

Switch(mFormat = “Boolean”, .ModelFormatBoolean, mFormat = “Currency”, .ModelFormatCurrency, _

mFormat = “Date”, .ModelFormatDate, mFormat = “DecimalNumber”, .ModelFormatDecimalNumber, _

mFormat = “General”, .ModelFormatGeneral, mFormat = “PercentageNumber”, .ModelFormatPercentageNumber, _

mFormat = “ScientificNumber”, .ModelFormatScientificNumber, mFormat = “WholeNumber”, .ModelFormatWholeNumber), _

mCell.Value

Next

End With

AddMeasure = “DONE”

End Function

Then, place the following information in the range D10:F14.

NetRevenue | SUMX(fTransactions,ROUND(RELATED(dProducts[Price])*fTransactions[Units]*(1-fTransactions[Discount]),2)) | DecimalNumber |

MaxRevenue | MAXX(fTransactions,ROUND(RELATED(dProducts[Price])*fTransactions[Units]*(1-fTransactions[Discount]),2)) | PercentageNumber |

MinRevenue | MINX(fTransactions,ROUND(RELATED(dProducts[Price])*fTransactions[Units]*(1-fTransactions[Discount]),2)) | Currency |

AverageRevenue | AVERAGEX(fTransactions,ROUND(RELATED(dProducts[Price])*fTransactions[Units]*(1-fTransactions[Discount]),2)) | General |

CountOfRevenue | COUNTAX(fTransactions,ROUND(RELATED(dProducts[Price])*fTransactions[Units]*(1-fTransactions[Discount]),2)) | General |

To run this as a worksheet formula, type this formula in any cell.

=AddMeasure(“fTransactions”,D10:D14)

This will add the 5 measures to the data model, as shown in the Pivot Table Fields list.

After the 5 measures are added to the pivot table, the resulting pivot table will look like this.

Of course, the DAX formulas to be added have to return valid results, or the procedure will fail.

This powerful technique is yet another reason why users should not completely abandon Excel for Power BI desktop, as discussed in this article at powerpivotpro.com

https://powerpivotpro.com/2017/09/excel-is-still-the-best-tool-for-teaching-dax/

And, this technique does not HAVE to be run from a UDF, but I am still amazed that it can. I am sure that you will find this very useful.

Filed under: Excel, Pivot Table, Power BI, PowerPivot DAX, VBA ]]>

What if I told you that I wanted to change tab colors on sheets in a workbook by entering a formula (UDF) on a worksheet. Impossible, right? No, it turns out that it is “easy”.

This simple UDF (code shown below) can be entered on a worksheet and the desired worksheet tab will change to any color you want.

Function ChangeTabColor(sht As String, RED_Color As Integer, GREEN_Color As Integer, BLUE_Color As Integer)

With ActiveWorkbook.Sheets(sht).Tab

.Color = RGB(RED_Color, GREEN_Color, BLUE_Color)

End With

End Function

For example, entering this formula in a cell will turn the tab on Sheet1 red.

=ChangeTabColor(“Sheet1”,255,0,0)

This figure shows the result in the example workbook of entering two cells. Note that the UDF does not have to be entered on the worksheet whose tab color is changed.

I have added a worksheet that has a list of colors along with their respective RGB codes for your convenience. I am sure that you will come up with many novel ways to use this technique.

The example file can be downloaded here.

Filed under: Excel, VBA ]]>

I recently published an article which showed how to document the existing formulas in a range.

You might want to go back and read that article, since the formula demonstrated there was the starting point of the formula presented here.

I wanted to modify that formula so that it would return formulas from a range that contained a specific Excel function. The desired formula for that purpose is shown below.

=TEXTJOIN(CHAR(10),TRUE,IF(NOT(ISERROR(FIND(Function&”(“,FORMULATEXT(fRange)))),ADDRESS(ROW(fRange),COLUMN(fRange))&”:”&FORMULATEXT(fRange),””))

where fRange is the defined range E2:F14

and

where Function is a defined range (in this case, K1).

One point of interest is that this formula does not require the use of ISFORMULA (as in the previous article) to validate whether a cell contains a formula since, for example, the string “SUM(“ would not be found in a cell not containing a formula.

So, this formula “looks” in each cell in fRange and if the function name in K1 is found in a cell, a string with the cell address and the formula is added to an array, which is processed and formatted by the TEXTJOIN function in cell K2 to afford the desired list. In the following figure, the result can be seen for finding formulas containing “SUM”.

In another example, the cells containing the FIND function are returned.

Note that even though some of the formulas return errors, this demonstration still shows the actual formula from each cell meeting the desired criteria.

Finally, if the value for the cell is desired, an expression for that can be added to the main formula. I do not have any plans to do that.

I hope that you find this technique useful.

You can download the example file here.

Filed under: Excel, TEXTJOIN ]]>

What if I told you that I had 2 non-contiguous 3D ranges in an Excel workbook and I wanted to return a single 1D array from those ranges. Impossible, right? No, it turns out that it is “easy”.

Prior to the introduction of the TEXTJOIN function, this would likely have been impossible. But, this function accepts native 3D ranges as range arguments. See:

It would have been nice if the technique was only a VBA solution, but although Textjoin is a VBA worksheet function in Excel, VBA will not accept a native 3D range as an argument. Likewise, a pure Excel formula solution would have been nice, and a method dows exist to do this

but it has severe limitations which prevents its use with a relatively large number of cells (maybe 150). The total number of characters that a cell can contain is 32,767 characters. This solution assumes that an average of 6 characters per cell plus a comma for each gives an approximate number of 4500 cells allowed.

Here is the solution.

=ArrayFromCDS(TEXTJOIN(“,”,TRUE,Sheet1:Sheet3!$B2:$D$6,Sheet1:Sheet3!$G$2:$G$6))

It consists of the TEXTJOIN worksheet function with 2 non-contiguous 3D ranges arguments

TEXTJOIN(“,”,TRUE,Sheet1:Sheet3!$B2:$D$6,Sheet1:Sheet3!$G$2:$G$6)

And a simple VBA function which converts a comma delimited string into a 1D array.

Function ArrayFromCDS(MyString As String)

ArrayFromCDS = Split(MyString, “,”)

End Function

In the example file, the array produced contains all of the elements of the two 3D ranges (shown below).

{“Name1″,”Name2″,”Name3″,”Name4″,”Name2″,”Name3″,”Name7″,”Name2″,”Name3″,”Name10″,”Name2″,”Name3″,”Name13″,”Name2″,”Name3″,”Name1″,”Name2″,”Name3″,”Name4″,”Name2″,”Name3″,”Name7″,”Name2″,”Name3″,”Name10″,”Name2″,”Name3″,”Name13″,”Name2″,”Name3″,”Name1″,”Name2″,”Name3″,”Name4″,”Name2″,”Name7″,”Name7″,”Name2″,”Name11″,”Name10″,”Name2″,”Name15″,”Name13″,”Name2″,”Name19″,”a”,”b”,”c”,”d”,”a”,”b”,”d”,”e”,”b”,”d”,”e”,”f”,”m”,”e”,”f”}

The figure shows this formula in cell I2.

I hope that you will find this useful.

The example file can be downloaded here.

Filed under: Excel, TEXTJOIN, VBA Tagged: 3D ]]>

Documenting Excel formulas is an important step in the auditing of spreadsheets. Presented here is a new technique to aid in that process.

The utility of the recently added FORMULATEXT, ISFORMULA and TEXTJOIN functions is sometimes underestimated. The FORMULATEXT and ISFORMULA functions were introduced with Excel 2013 and the TEXTJOIN function is available only the Excel 2016 version which comes with an Office 365 subscription. In the technique demonstrated in this article, al three of these functions are used in a single formula. For the result, see the following figure:

The key formula (in cell K1) is

=TEXTJOIN(CHAR(10),TRUE,IF(ISFORMULA(fRange),ADDRESS(ROW(fRange),COLUMN(fRange))&”:”&FORMULATEXT(fRange),””))

To understand how this formula works, lets break it down into its main parts.

ADDRESS(ROW(fRange),COLUMN(fRange)) returns an array of cell addresses for the desired range (in this case, fRange, which is E1:F13).

FORMULATEXT(fRange) returns an array of formulas for that range.

When these two formulas are concatenated with a colon, you get an array that looks like this.

{#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;#N/A,#N/A;”$E$13:=SUM(E1:E12)”,”$F$13:=SUM(F1:F12)”}

In this example, formulas only exist in cells E13 and F13, with the rest of the array elements as #N/A. When the ISFORMULA function is applied to the range is question, the result is

{FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;FALSE,FALSE;TRUE,TRUE}

So, the final array created by the IF function looks like this.

{“”,””;””,””;””,””;””,””;””,””;””,””;””,””;””,””;””,””;””,””;””,””;””,””;”$E$13:=SUM(E1:E12)”,”$F$13:=SUM(F1:F12)”}

When this array is processed by the TEXTJOIN function, it affords a string of formulas with their corresponding cell locations.

Note that this technique can also be used with non-contiguous ranges. Since the TEXTJOIN function can use additional arrays as arguments (see https://dhexcel1.wordpress.com/2017/05/21/excel-short-and-sweet-tip-15-using-textjoin-with-non-contiguous-ranges-by-david-hager/ ), the same array formula used in the 3^{rd} argument of this TEXTJOIN example can be used in subsequent arguments, provided that the desired ranges for those arrays are different.

You can download the example file here.

Filed under: Excel, TEXTJOIN Tagged: FORMULATEXT, isformula ]]>

Disclaimer: This technique uses the TEXTJOIN function. You need the Excel version included in Office 365 for the TEXTJOIN formula to work.

There are quite a few examples of a material based on ingredients. These include recipes, blends, paint mixtures, etc. Presented here is a method of extractiong from a list the ingredients for each mixture based on whether they have a low, medium or high cost.

The main list has 3 columns: Mixture, Ingredient and Cost. The lookup table has a list of ingredients based on cost category, as shown in the figure.

The main formula from cell G2 is

=TEXTJOIN(“, “,TRUE,IF(((Mixture=$F2)+(Cost=G$1))=2,Ingredient,””))

This formula is filled to complete the lookup table.

If the mixture and the cost are correct for the formula based on its position in the table, it will return the corresponding ingredient into an array. The other array elements are left blank. Then, the TEXTJOIN function concatenates the elements of the array, excluding blanks.

I hpe that you find this useful!

You can download the file here.

Filed under: Excel, TEXTJOIN ]]>

It is relatively simple to construct a star rating string (in this case 8 out of 10) by using the REPT function in the following formula.

=REPT(UNICHAR(9733),8)&REPT(UNICHAR(9734),2)

gives ★★★★★★★★☆☆

However, by using the TEXTJOIN function and an array of the characters from the previous formula using the MID function, the following array formula can insert spaces between the stars.

=TEXTJOIN(” “,,MID(REPT(UNICHAR(9733),8)&REPT(UNICHAR(9734),2),ROW(INDIRECT(“1:10”)),1))

gives ★ ★ ★ ★ ★ ★ ★ ★ ☆ ☆

Of course, any character (a dash) can be be used as the “spacer” in this formula construction.

=TEXTJOIN(“-“,,MID(REPT(UNICHAR(9733),8)&REPT(UNICHAR(9734),2),ROW(INDIRECT(“1:10”)),1))

gives ★-★-★-★-★-★-★-★-☆-☆

This technique is not limited to stars, so I am sure that you will find other great uses for this!

Filed under: Excel, TEXTJOIN ]]>

In my previous article I demonstrated a technique to show a list based on priority.

Since I wanted the solution to be a single cell, single formula technique, the calculation was somewhat complex and the TEXTJOIN function was used to create the string. For that technique, you have to have the Excel version included in Office 365 in order for the TEXTJOIN formula to work. But, many people do not have access to that Excel version. So, I decided to publish a solution that does not require TEXTJOIN. Although this method uses several intermediate steps, in many ways it is much simpler to implement.

In the list are columns defined as Item and Priority respectively. To obtain the priority list, place consecutive numbers from 1 to 5 (per the values in Priority) in column C starting at C2. Then, put the following formula in cell D2 and fill down.

=INDEX(Item,MATCH(D2,Priority,0))

That gives the priority list in column D in cells. If you want to reproduce the text string as per the previous article, place this formula in cell F14 as shown in the figure.

=E2&CHAR(10)&E3&CHAR(10)&E4&CHAR(10)&E5&CHAR(10)&E6

You can download the example file here.

Filed under: Excel, Other ]]>

I mentioned in the previous article:

that there were variations on the theme for returning items to a string based on a specified criteria. The variation I present here is reorder items from a list based on the selected priority. In the following figure, there is a list with a column containing items and a column containing priority selection of those items.

The goal is to create a string that orders the items based on the priority selections in the adjacent column.

Although the title of this article implies that TEXTJOIN is an important part of this technique, the heart of it is to be found in the following forrmula.

=INDEX(Item,N(IF(1,MATCH(ROW(INDIRECT(“1:”&COUNT(Priority))),Priority,0))))

The ability of the INDEX function to return an array of items is explained in this article.

https://excelxor.com/2014/09/05/index-returning-an-array-of-values/

If that formula is the heart, then this part of the formula is the magic.

=MATCH(ROW(INDIRECT(“1:”&COUNT(Priority))),Priority,0)

which evaluates to {5;7;10;2;3}, the positions of the priorities from 1 to 5. The rest of the master formula coerces the INDEX function to return the desired items in the desired order. That array is used in this TEXJOIN formula to obtain the desired string.

=TEXTJOIN(CHAR(10),,INDEX(Item,N(IF(1,MATCH(ROW(INDIRECT(“1:”&COUNT(Priority))),Priority,0)))))

The result is shown below.

Note that the 1^{st} argument of this formula is the delimiter CHAR(10). If desired, you can use a space delimiter to make a paragragh form of the string.

The file can be downloaded here.

Filed under: Excel, TEXTJOIN ]]>

People in many walks of life need a list of instructions to follow. These can include from a doctor’s instruction, an exercise routine, a corporate protocol, etc. In many cases, a generic list of all possible instructions could be available. If so, the following technique could be very useful.

The list of instructions shown in column A is accompanied by a column B containing Yes or No (added through Data Validation). The desired result is to create a string that contains only the instructions that are matched with Yes.

The following array formula in G3 works for this example.

=TEXTJOIN(CHAR(10),,IF(B7:B16=”Yes”,A7:A16,””))

It will return a text string for each selected instruction to appear as a vertical list, which then can be printed to give to the intended group or person. See Figure:

There are a number of other useful variations of this technique which I plan to explore.

You can download the example file here.

Filed under: Excel, TEXTJOIN ]]>

The ability to reuse Power Query M procedures has been for the most part reserved for those capable of purchasing the full-blown Power BI package. Wouldn’t it be great for anyone owning Excel to benefit from a way to store and run M procedures? Well, I believe that you have come to the right place.

The inspiration behind this technique came from Chris Webb’s article for running M code from text files.

https://blog.crossjoin.co.uk/2014/02/04/loading-power-query-m-code-from-text-files/

In the comments section of that article, there was a discussion of the portability of the text files to other potential users. I then made the following comment: “You could obviously store the entire M code in worksheet cells, if you had to.” Well, nothing was done with this idea, and I had forgotten about it until now. I decided to use a named cell to hold the M code, as described in this article.

https://blog.crossjoin.co.uk/2014/07/22/working-with-excel-named-ranges-in-power-query/

Chris helped me to work through a few issues I had in making this. Thanks for your help, Chris!

Here is the M code that utilizes the M procedure stored in a named range Excel cell (MCode).

let

Source = Excel.CurrentWorkbook(){[Name=”MCode”]}[Content],

ChangeDataTypes = Table.TransformColumnTypes(Source,

{“Column1”, Text.Type}),

GetMCode = ChangeDataTypes{0}[Column1],

EvaluatedExpression = Expression.Evaluate(GetMCode, #shared)

In

EvaluatedExpression

I decided to use Matt Allington’s calendar table M code for testing (great M code, Matt!)

https://powerpivotpro.com/2015/02/create-a-custom-calendar-in-power-query/

When I copied the code from the article, I found that there was no way to paste the entire code into 1 cell, mainly because multiple lines of text are viewed by Excel as one line per cell. So, I ended up with 25 lines of code in cells A1:A25. Thankfully, the TEXTJOIN function provides a way to assemble those lines of code so that they are readable by Power Query. The formula =TEXTJOIN(” “,,A1:A25) returns a single string with spaces between the lines of code, which appears to be necessary for the code to run correctly from a single cell. In this case, the named range cell is called MCode (cell C1). So, the main code pulls in the single cell table and transforms it into text. That M code text was run using Expression.Evaluate to return the Power Query query calendar table. The named cell MCode can either contain the TEXTJOIN formula associated with the lines of code desired or you can Copy, Paste Special Values to make a string that can be stored. In the example file, cell C4 contains the code string for the main M procedure, which you can copy/paste into the Power Query Advanced Editor to run. The stored M procedures (in this case only one – in cell C5) can be either placed in the MCode cell or a formula can be used to return the desired procedure.

I have removed the calendar table query result, but you can reproduce it if you like. I do not plan to make a storehouse of M procedures from this (at least, not one I am willing to share), so feel free to use this technique as you desire. IMHO, the ability to potentially store and use 1000’s of M procedures in a portable way is exciting.

The example file can be downloaded here.

Filed under: Excel, M Code, Power BI, TEXTJOIN Tagged: Power Query ]]>

The ability to reuse Power Query M procedures has been for the most part reserved for those capable of purchasing the full-blown Power BI package. Wouldn’t it be great for anyone owning Excel to benefit from a way to store and run M procedures? Well, I believe that you have come to the right place.

The inspiration behind this technique came from Chris Webb’s article for running M code from text files.

https://blog.crossjoin.co.uk/2014/02/04/loading-power-query-m-code-from-text-files/

In the comments section of that article, there was a discussion of the portability of the text files to other potential users. I then made the following comment: “You could obviously store the entire M code in worksheet cells, if you had to.” Well, nothing was done with this idea, and I had forgotten about it until now. I decided to use a named cell to hold the M code, as described in this article.

https://blog.crossjoin.co.uk/2014/07/22/working-with-excel-named-ranges-in-power-query/

Chris helped me to work through a few issues I had in making this. Thanks for your help, Chris!

Here is the M code that utilizes the M procedure stored in a named range Excel cell (MCode).

let

Source = Excel.CurrentWorkbook(){[Name=”MCode”]}[Content],

ChangeDataTypes = Table.TransformColumnTypes(Source,

{“Column1”, Text.Type}),

GetMCode = ChangeDataTypes{0}[Column1],

EvaluatedExpression = Expression.Evaluate(GetMCode, #shared)

In

EvaluatedExpression

I decided to use Matt Allington’s calendar table M code for testing (great M code, Matt!)

https://powerpivotpro.com/2015/02/create-a-custom-calendar-in-power-query/

When I copied the code from the article, I found that there was no way to paste the entire code into 1 cell, mainly because multiple lines of text are viewed by Excel as one line per cell. So, I ended up with 25 lines of code in cells A1:A25. Thankfully, the TEXTJOIN function provides a way to assemble those lines of code so that they are readable by Power Query. The formula =TEXTJOIN(” “,,A1:A25) returns a single string with spaces between the lines of code, which appears to be necessary for the code to run correctly from a single cell. In this case, the named range cell is called MCode (cell C1). So, the main code pulls in the single cell table and transforms it into text. That M code text was run using Expression.Evaluate to return the Power Query query calendar table. The named cell MCode can either contain the TEXTJOIN formula associated with the lines of code desired or you can Copy, Paste Special Values to make a string that can be stored. In the example file, cell C4 contains the code string for the main M procedure, which you can copy/paste into the Power Query Advanced Editor to run. The stored M procedures (in this case only one – in cell C5) can be either placed in the MCode cell or a formula can be used to return the desired procedure.

I have removed the calendar table query result, but you can reproduce it if you like. I do not plan to make a storehouse of M procedures from this (at least, not one I am willing to share), so feel free to use this technique as you desire. IMHO, the ability to potentially store and use 1000’s of M procedures in a portable way is exciting.

The example file can be downloaded here.

Filed under: Excel, M Code, Power BI, TEXTJOIN Tagged: Power Query ]]>

I recently demonstrated what became a popular Excel technique – looking up a Bible verse using Excel’s web functions. On LinkedIn, I received a comment from Raul stating that he did not understand English, only Spanish. So, I decided to add language translating to the model. I tried to find a (free) way to do this directly from an API, but I could not. I turned instead to the translation technique I had already published which use a VBA procedure. I combined both of the methods as demonstrated in the links shown below.

https://dhexcel1.wordpress.com/2017/06/03/creating-an-excel-translator-by-david-hager/

https://dhexcel1.wordpress.com/2017/07/03/lookup-a-bible-verse-using-excel-wo-vba-by-david-hager/

You can read both of these articles to see the details of how each was constructed. Meanwhile, the key formula in cell H5 is:

=Translate(mString,LangCode)&T(NOW())

where mString = IF(ISERROR(FIND(“/b>”,oString)),oString,MID(oString,FIND(“/b>”,oString)+3,255))

and oString = FILTERXML(WEBSERVICE(“http://labs.bible.org/api/?passage=”&TheBook&” “&TheChapter&”:”&TheVerse&”&type=xml”),”//text”)

and LangCode = INDEX(LanguageCodes,MATCH(Language,LanguageNames,0))

Use the dropdowns in H2:J2 to select verse and language.

Sometimes the query has to be run twice in order to work. I have not been able to solve this problem, so please run the query a 2^{nd} time if the cell containing the verse is blank. Alternatively, if you click in the formula in H5 and press Enter, it should calculate as desired. The problem is likely due to the Excel web functions becoming confused during recalculation. I attempted to correct this by adding &T(NOW()) to the end of the formula in cell H5. It appeared to help, but I cannot guarantee it. You can also try pressing Ctrl-Alt-F9 for recalculation.

This should be useful to everyone worldwide.

You can download the file here.

Filed under: Excel, VBA, web Tagged: FILTERXML, UDF ]]>

When looking at the vagaries of a Worksheet UDF, it appeared to me that anything viewed by Excel as an object could be invoked by the UDF. So, I thought, what is a large Excel object that may not work with this methodology? After a while, I thought of an Userform. Surely, I cannot show an Userform in this way. But, I WAS WRONG!

Open a new workbook and go to the Visual Basic Editor (VBE) and add an Userform. Then, add a standard module and add this code to it.

Function UForm()

UserForm1.Show

End Function

Then enter this formula in cell A1.

=UForm()

And presto, the userform appears!

Obviously, any userform, including those of your elaborate design, can be shown in this way. To have this UDF run when a specific cell is recalculated (in this case, A2), you can use a formula like:

=A2&UForm()

as shown in the following figure:

Have fun with this!

Filed under: Excel, VBA Tagged: UDF ]]>

A while back I worked for quite some time on returning the sunrise and sunset from an address using VBA. I was not successful, so I shelved that project. But, after publishing several popular articles using Excel’s web functions, I decided to revisit this project using those functions. As always, implementation of this technique requires the appropriate xml data sources and the corresponding return values. I could not locate a single xml source to do this, so I finally found 3 xml sources that, if combined, would theoretically provide me with the desired result. Here are the 3 API sources.

http://maps.googleapis.com/maps/api

http://api.timezonedb.com/ ‘Requires a free API key

The 1^{st} API takes a detailed address and returns latitude and longitude for that location. The 2^{nd} API takes latitude and longitude as input and returns a daylight savings time (dst) value and a GMT offset (gmtOffset) value. The 3^{rd} API takes latitude, longitude, dst, gmtOffset and the current day and returns the sunrise and sunset times. For the demonstration, address is a defined name formula.

address =”4163 W. Sparrow St., Orange, Tx.”

However, a named cell could also be used to contain the address.

The two formulas needed to return latitude and longitude from googleapis.com are

latitude= FILTERXML(WEBSERVICE(“http://maps.googleapis.com/maps/api/geocode/xml?address=”&ENCODEURL(address)&”&sensor=false”),”//lat”)

longitude= FILTERXML(WEBSERVICE(“http://maps.googleapis.com/maps/api/geocode/xml?address=”&ENCODEURL(address)&”&sensor=false”),”//lng”)

Note that the Excel ENCODEURL function is needed to convert the address to a form compatible with the API.

The latitude and longitude coordinates are then used as parameters in the timezonedb.com API to return values for daylight savings time and GMT offset. An API key is required by the web site owner, but you can register and get a free one at https://timezonedb.com/register. The API key is stored in the defined name API_Key.

dst = FILTERXML(WEBSERVICE(“http://api.timezonedb.com/v2/get-time-zone?key=”&API_Key&”&format=xml&by=position&lat=”&latitude&”&lng=”&longitude&””),”//dst”)

gmtOffset = (FILTERXML(WEBSERVICE(“http://api.timezonedb.com/v2/get-time-zone?key=”&API_Key&”&format=xml&by=position&lat=”&latitude&”&lng=”&longitude&””),”//gmtOffset”)/3600)-1

Finally, all of the parameters from the previous 2 APIs plus the TODAY function are used in the earthtools.org API to reurn sunrise and sunset times for the specified location.

sunrise= TEXT(FILTERXML(WEBSERVICE(“http://new.earthtools.org/sun/”&latitude&”/”&longitude&”/”&DAY(TODAY())&”/”&MONTH(TODAY())&”/”&gmtOffset&”/”&dst&””),”//sunrise”),”hh:mm:ss”)

sunset= TEXT(FILTERXML(WEBSERVICE(“http://new.earthtools.org/sun/”&latitude&”/”&longitude&”/”&DAY(TODAY())&”/”&MONTH(TODAY())&”/”&gmtOffset&”/”&dst&””),”//sunset”),”hh:mm:ss”)

Note that the date parameters can be changed if the day to get results for is not today.

The results of the formulas used in this technique can be seen in this figure.

The formulas have been converted to values in the model due to my inability to share my API key, but you add back in what you want to see with the formulas described in this article (and in defined names).

You can download the file here.

Filed under: Excel, web Tagged: FILTERXML, WEBSERVICE ]]>

The key to returning valuable information to Excel is to find sources of xml data. In this example, the xml data is supplied by

The goal is to make an alert message for the latest strong earhquake occurring worldwide. The following 3 formulas return the information needed for that message.

Location: =FILTERXML(WEBSERVICE(“https://earthquake.usgs.gov/fdsnws/event/1/query?format=xml&starttime=”&TEXT(TODAY(),”yyyy/mm/dd”)&”&endtime=”&TEXT(TODAY()+1,”yyyy/mm/dd”)&”&minmagnitude=5″),”//description/text”)

Magnitude: =FILTERXML(WEBSERVICE(“https://earthquake.usgs.gov/fdsnws/event/1/query?format=xml&starttime=”&TEXT(TODAY(),”yyyy/mm/dd”)&”&endtime=”&TEXT(TODAY()+1,”yyyy/mm/dd”)&”&minmagnitude=5″),”//mag/value”)

Time: =TEXT(FILTERXML(WEBSERVICE(“https://earthquake.usgs.gov/fdsnws/event/1/query?format=xml&starttime=”&TEXT(TODAY(),”yyyy/mm/dd”)&”&endtime=”&TEXT(TODAY()+1,”yyyy/mm/dd”)&”&minmagnitude=5″),”//time/value”), “yyyy/mm/dd h:m”)&” UTC”

The WEBSERVICE function brings in the xml content from the web site and the FILTERXML function finds the desired data based on the node used in the 2^{nd} argument.

After these formulas return the desired data for the latest earhquake with a magnitude greater than 5.0, as shown in the figure

the TEXTJOIN function can be used to construct a readable alert message. The following array formula in cell B5 affords a formatted message from the cells A1:B3.

=TEXTJOIN(IF(COLUMN(A1:B3)=1,”: “,”; “),,A1:B3)

An important feature of this formula is the use of different delimiters based on the column where the information resides.

I hope that you find these techniques useful.

You can download the example file here.

Filed under: Excel, TEXTJOIN, web Tagged: FILTERXML, WEBSERVICE ]]>

Once again, I am borrowing from an Excel technique from John Walkenbach, in this case playing a .wav file in Excel.

http://spreadsheetpage.com/index.php/tip/playing_sound_from_excel/

I have modified his code by coverting it to a function procedure with one argument for running a specified wav file. Copy into a module in the VBE.

Private Declare Function PlaySound Lib “winmm.dll” _

Alias “PlaySoundA” (ByVal lpszName As String, _

ByVal hModule As Long, ByVal dwFlags As Long) As Long

Const SND_SYNC = &H0

Const SND_ASYNC = &H1

Const SND_FILENAME = &H20000

Function PlayWAV(fName As String)

PlayWAV = “”

WAVFile = fName & “.wav”

WAVFile = ThisWorkbook.Path & “\” & WAVFile

Call PlaySound(WAVFile, 0&, SND_ASYNC Or SND_FILENAME)

End Function

This procedure assumes that the wav files to be played are in the same folder as the workbook.

In order to play a random sound, I made these 2 defined name formulas.

soundlist ={“chicken”,”horse”,”kitten”,”owl”,”cow”}

rand_sound =INDEX(soundlist,INT(RAND()*COUNTA(soundlist))+1)

So, the .wav files starting with, in this example, (chicken, horse, kitten, owl and cow) must exist for this function to work. You must personalize this array so that this technique will work with your own wav files.

Now, enter this function in a worksheet cell

=PlayWAV(rand_sound)

Each time that the worksheet is recalculated, a random sound will play. I hope that you will find this useful.

Filed under: Excel, VBA Tagged: UDF ]]>

I am extending the closest value technique I published recently to calculate the same based on a filtered list.

In this demonstration, the goal is to highlight values in a numeric range that are clostest to the average of that range in a filtered list. So, we first make the range dynamic with the following defined name formula.

NumRange =OFFSET(Sheet1!$A$1,1,,COUNTA(Sheet1!$A:$A)-1)

Then, we modify that range to include only filtered values.

fNumRange =IFERROR(IF(SUBTOTAL(3,OFFSET(NumRange,ROW(NumRange)-MIN(ROW(NumRange)),,1)),NumRange,””),””)

For more information on the SUBTOATL function as used here, see:

Next, we use that range to make an array of the absolute differences of each value of the range from the average.

ABS_Range =IFERROR(ABS(fNumRange-AVERAGE(fNumRange)),””)

We can then define a cell for the number of values to highlight.

N_Values =$B$2

The heavy work is done by the next formula, which creates an array of the N values to be higlighted.

Num_Array=INDEX(NumRange,N(IF(1,TRANSPOSE(MATCH(SMALL(ABS_Range,ROW(

INDIRECT(“1:”&N_Values))),ABS_Range,0)))))

This formula returns the position of each smallest deviation in the 2^{nd} argument of the INDEX function, which then returns the values corresponding to those deviations, based on a filtered list. The use of the formula syntax needed to do this with the INDEX function is explained at the following link.

https://excelxor.com/2014/09/05/index-returning-an-array-of-values/

This formula can now be used in the creation of the CF, where CF Formula is =SUM(N(A1=Num_Array)), starting at A1 and applied to all of Column A.

The result of this CF is shown below.

The example file can be downloaded here.

Filed under: conditional formatting, Excel, filtering Tagged: SUBTOTAL ]]>

Conditional Formatting (CF) is one of the most powerful tools in Excel for visualizing data. Because CF can use formulas as input to the CF process, the ability to create formulas based on different data visualization requirements is important. In this demonstration, the goal is to highlight values in a numeric range that are clostest to the average of that range. So, we first make the range dynamic with the following defined name formula.

NumRange =OFFSET(Sheet1!$A$1,1,,COUNTA(Sheet1!$A:$A)-1)

Next, we use that range to make an array of the absolute differences of each value of the range from the average.

ABS_Range =ABS(NumRange-AVERAGE(NumRange))

We can then define a cell for the number of values to highlight.

N_Values =$B$2

The heavy work is done by the next formula, which creates an array of the N values to be higlighted.

Num_Array=INDEX(NumRange,N(IF(1,TRANSPOSE(MATCH(SMALL(ABS_Range,ROW(

INDIRECT(“1:”&N_Values))),ABS_Range,0)))))

This formula returns the position of each smallest deviation in the 2^{nd} argument of the INDEX function, which then returns the values corresponding to those deviations. The use of the formula syntax needed to do this with the INDEX function is explained at the following link.

https://excelxor.com/2014/09/05/index-returning-an-array-of-values/

This formula can now be used in the creation of the CF, where CF Formula is =SUM(N(A1=Num_Array)), starting at A1 and applied to all of Column A.

The result of this CF is shown below.

The example file can be downloaded here.

Filed under: conditional formatting, Excel Tagged: formulas ]]>

John Walkenbach was the first to create an Excel application that allowed the user to read Bible verses.

http://spreadsheetpage.com/index.php/file/the_bible_in_excel/

He used an approach where the entire Bible was loaded into a workbook. I decided to try using a new technique that did not require the Bible verses be part of the workbook.

But, to do this, I needed a source of the number of verses in each Bible chapter. Luckily, I found someone that had already performed that task.

https://c2it.wordpress.com/2011/10/20/table-of-bible-books-chapters-verses/

After pulling in the table from this web site with Power Query and fixing a minor Text to Columns issue, I needed to unpivot the data. In order to do this, I used this Power Query technique on the table.

It required highlighting 149 columns to unpivot, which is the most I have ever heard of. Armed with a three column table with books, chapters and number of verses, I was ready to build the worksheet input cells. I created an unique list of Bible books from column A into column E by utilizing Data Advanced Filter with the unique option. I also made a list of numbers from 1 to 150 (the maximum number of chapters in any Bible book). I added a Data Validation list to cell H1 (named TheBook) using the following defined name range.

BibleBook =BibleChapterInfo!$E$2:$E$67

The next step was to create a dynamic defined name range for chaapter numbers corresponding to each book. A Data Validation list was added to cell I1 with the formula shown below.

TheChapters =INDIRECT(“N2:N”&INDEX(Chapters,MATCH(TheBook,BibleBook,0))+1)

Finally, a Data Validation list was added to cell J1 with the formula shown below.

TheVerses= INDIRECT(“N2:N”&INDIRECT(“C”&MATCH(TheBook&TheChapter,BibleChapterInfo!$A$1:$A$1198&BibleChapterInfo!$B$1:$B$1198,0))+1)

where cells H1:J1 are named TheBook, TheChapter and TheVerse respectively (see figure).

While these formulas are very useful and powerful, a discussion of how they work is outside of the focus of this article, which is to use the WEBSERVICE and FILTERXML functions to return the desired Bible verse without use of VBA code.

All of this preliminary work was done in the hope that an XML source for Bible verses could be found. And, the following site was identified as providing this.

http://labs.bible.org/api_web_service

So, the following formula does all of the heavy work in retrieving the XML output and reading the correct node.

In cell H4 =FILTERXML(WEBSERVICE(“http://labs.bible.org/api/?passage=”&TheBook&” “&TheChapter&”:”&TheVerse&”&type=xml”),”//text”

As originally designed, this formula was intended to be in cell H5 (the Bible verse cell). Well, it turned out that some of the verses returned by the web service had a topic attached, as shown below for the value for Song of Solomon 2:3.

<b>The Beloved about Her Lover:</b> Like an apple tree among the trees of the forest, so is my beloved among the young men. I delight to sit in his shade, and his fruit is sweet to my taste.

And so, the following formula removes this XLM part from the string if it is present.

In cell H5 =IF(ISERROR(FIND(“/b>”,H4)),H4,MID(H4,FIND(“/b>”,H4)+3,255))

I hope that you find the techniques demonstrated here useful.

You can download the example file here.

Filed under: Excel Tagged: FILTERXML, WEBSERVICE ]]>

I have been following Mark’s recent posts at https://exceloffthegrid.com/ about automation from Excel.

https://exceloffthegrid.com/controlling-word-from-excel-using-vba/

https://exceloffthegrid.com/controlling-powerpoint-from-excel-using-vba/

That got me thinking about the use of user-defined functions in automating/instatiating other applications.

As it turns out, I first demonstrated the ability of user-defined functions to be used in automating an app (in this case Mappoint) in 2005 in this article on Dick Kuseika’s web site.

http://dailydoseofexcel.com/archives/2005/04/25/automating-mappoint/

In the comments of this article, Jan Karel Pieterse (http://www.jkp-ads.com/ ) showed that the same thing could be done with Microsoft Word. I am using his example here to show that it does work.

Here is the code:

Function WriteResultToWord(stest As String)

Dim oWdObj As New Word.Application

Application.Volatile False

oWdObj.Visible = True

oWdObj.Documents.Add

oWdObj.ActiveDocument.Paragraphs.First.Range.InsertAfter ” ” & stest

End Function

The result of entering this formula in cell E2 (=WriteResultToWord(D1)) is to open Word and insert the text into the blank document, shown in the following figure.

The next step was to find out if this technique would work with any other application. To test this on Power Point, I used this great example from Chandoo’s site.

http://chandoo.org/wp/2011/08/03/create-powerpoint-presentations-using-excel-vba/

I simply changed the Sub routine to a Function, with little modification (see code in the example file).

So, entering =AddChartsPowerPoint() in a cell opens Power Point and adds two charts (see below).

In this article I shared the technique of automation using a UDF. I am sure that you will extend these ideas in your own work.

Here is the example file.

Filed under: Excel, VBA Tagged: automation, UDF ]]>

Most people reading this article have seen how to document a formula with the N function. Here is an example.

=SUM(A1:A3)+N(“This formula sums the first 3 values in Column A”)

The technique presented here uses a similar concept (the result is not affected by the additional formula).

However, instead of documenting the formula, it adds the ability to provide an audio result each time the formula is recalculated. I am sure that the use of this UDF will find wide usage throughout the Excel community.

Here is the VBA Function code for doing this. Make sure to add the Microsoft Speech Object Library (sapi.dll version) under Tools, Reference for this to work.

Function GiveVocalResult(Optional Person As String = “Him”, Optional bVolatile As Boolean = False, _

Optional Rate As Long = 1, Optional Volume As Long = 60)

Dim Voc As SpeechLib.SpVoice

Set Voc = New SpVoice

Dim sAddress As String

Application.Volatile bVolatile

With Voc

If Person = “Him” Then

Set .voice = .GetVoices.Item(0) ‘male

ElseIf Person = “Her” Then

Set .voice = .GetVoices.Item(1) ‘female

Else

End If

.Rate = Rate

.Volume = Volume

sAddress = Application.Caller.Address

rResult = Evaluate(Mid(Range(sAddress).Formula, 1, InStr(1, Range(sAddress).Formula, “&Give”) – 1))

.Speak rResult

End With

End Function

After numerous attempts to create the desired UDF, I finally came up with a solution. It is based on these two line of VBA code.

sAddress = Application.Caller.Address

rResult = Evaluate(Mid(Range(sAddress).Formula, 1, InStr(1, Range(sAddress).Formula, “&Give”) – 1))

Obtaining the address containing the formula proved to be the right path. The use of the caller address in the Evaluate function afforded the result of the “first” formula. There are two examples that illustrate the use of the GiveVocalResult UDF. Note that all of the arguments of the function are optional.

In the first example, shown in the following figure, a formula that looks for the second largest value in a range “reads” the result in a female voice.

In D1 =LARGE(A1:A10,2)&GiveVocalResult(“Her”)

When values are changed in the range A1:A10, the result of the formula is vocalized. The use of “Her” in the first function argument changed the default value of Him to Her.

In the second example, the value in cell C2 is set by using a data validation drop down list. When changed, the formula in D2 (=C2&GiveVocalResult()) reads the result in a male voice.

The last 3 arguments in the function are all set with default values. bVolatile is set to False, Rate is set to 1 (can vary between -10 to 10, and Volume is set to 60 (can vary from 0 to 100). Experiment with the settings and enjoy.

Because of what I consider to be a groundbreaking technique, please reference my web site when you use it.

https://dhexcel1.wordpress.com/

The example file can be downloaded here.

Filed under: Excel Tagged: UDF ]]>

I was watching one of Mike Girvin’s excellent Excel videos today. The technique demonstrated in the video was to use Power Query to extract items in list 1 that are NOT In list 2:

https://www.youtube.com/watch?v=JztEKJ-XkCU

I realized that this was the opposite of the conditional formatting technique I had just published.

So, for the sake of completeness, I decided to modifyvmy technique to emulate Mike’s technique.

Only a minor modification of the the CF formula was neccesary to produce the opposite condition.

=ISERROR(FIND(CONCAT($A2:$E2),CONCAT($I$2:$M$6)))

You can see the results in the following figure.

You can download the example file here.

Filed under: conditional formatting, Excel Tagged: formulas ]]>

Here is the scenario. You have a long list with multiple columns and a second list containing records to look up in the first list. All of the records in each row of the first list must be compared with all of the records in the second list.

Here is the conditional formatting formula that will highlight the desired rows. Although it appears surprisingly simple, it took me quite a while to come up with this.

=FIND(CONCAT($A2:$E2),CONCAT($I$2:$M$4))

This formula looks for the concatenated row string in the long string from list 2 and if the FIND function finds the string, a value corresponding to the position of the string is returned. Any number of 1 and above is interpreted in CF as TRUE. Otherwise, the formula produces an error, which is interpeted as FALSE.

This CF formula was applied to list 1 starting at A2.

As you can see from the following figure, the expected rows in list 1 are highlighted.

Now, if your data happened to be all numbers in each column, a row could be hightlighted by coincidence due to a match in the large concat string. So, don’t use this technique with lists of that characteristic.

I am sure that you will find this technique useful.

You can download the example file here.

Filed under: conditional formatting, Excel Tagged: formulas ]]>

In case you have not heard, on August 21, 2017, a total eclipse shadow is going to stretch across the entire United States. And, the rest of the U.S. will experience a partial eclipse of vaying degree based on the specific location.

This workbook will direct you to information for a specified location at timeanddate.com for the August 2017 total eclipse of the sun.

It is important to note that this workbook does not in any way purport to access or create any information about the eclipse directly. Rather, it uses a link to the web site following the guidelines of the disclaimer to open a web page with the specified eclipse information.

https://www.timeanddate.com/information/disclaimer.html

The creation of the list lookups used in this example were discussed in this recent article.

Please review that article to see how the control cells C3 and D3 work. When the state is selected in C3, the list in D3 is populated with the desired city. When both are selected, in cell D1 (named The DesiredLink) the array formula:

=INDEX(EclipseLink,MATCH(TheCityName&TheStateName,City&State,0))

which looks up the eclipse link for that state and city.

When the CommandButton is clicked, the following procedure in the Control worksheet module is run.

Private Sub GetEclipseInfo_Click()

ActiveWorkbook.FollowHyperlink Address:=Range(“TheDesiredLink”).Value

End Sub

This procedure uses the correct link to access the eclipse web site for the specified statye and city, which is opened in your browser. Hoper that you enjoy this, and the eclipse.

You can download the file here.

Filed under: Excel, VBA Tagged: formulas ]]>

When you have columns in a list that contain (for instance) state names and their corresponding cities, you might find it useful to create lists from the internal range of the subordinate column. For example, in the list shown here you might want to return the range from the City column corresponding to a specified state in the State column shown below.

The key to generating lists from the City column is the following formula.

TheCity=OFFSET(State,MATCH(TheStateName,State,0)-1,-1,MATCH(TheStateName,State,1)-MATCH(TheStateName,State,0)+1)

where State is the column in the list on the LookupSheet tab containing state names and

where TheStateName is the cell containing a data validation list of unique states (Control!C3).

where TheCityName cell (Control!D4) contains a data validation list of cities corresponding to the return value of TheCity.

Basically, what this formula does is return a range from the City column, given a specified state.

The following figure shows the cells with the data validation drop down lists.

The information from these cells can be used for further lookups, which is the subject of an upcoming post. You can download the example file here.

Filed under: Excel Tagged: data validation, formulas ]]>

Getting A Handle On Userforms [VBA]

https://colinlegg.wordpress.com/2016/05/06/getting-a-handle-on-userforms-vba/

Excel VBE Options

http://www.excelgaard.dk/Lib/VBE/Options/

Excel Solution: Who Should Sit Where?

http://datascopic.net/seating/?doing_wp_cron=1497911478.3255810737609863281250

Basket Analysis in DAX

http://www.daxpatterns.com/basket-analysis/

Excel Short & Sweet Tip #6 (Shuffling a String) by David Hager

https://dhexcel1.wordpress.com/2017/04/25/excel-short-sweet-tip-6-shuffling-a-string-by-david-hager/

Filed under: Excel, PowerPivot DAX, VBA ]]>

Sparklines are a relatively recent addition to the myriad of tools in Excel (version 2010). They are very useful in creating a number of different ways to visualize data. In this example, creating sparklines from a vertical range of data in a table reveals some interesting options. If you make a data table and create a sparkline from it, the process goes smoothly, generating a sparkline that will auto-expand its chart data along with added data to the table as shown in the figure.

But, what if you want to display only the last N values in the table. In that case, you need to use OFFSET formulas as ranges, as first discussed in

https://dhexcel1.wordpress.com/2014/05/04/excel-did-you-know-tip5/

The formula needed to do this (with input from cell F5) is defined as:

LastN1=OFFSET(Sheet1!$A$4,COUNT(TrendData)-Sheet1!$F$5+1,,Sheet1!$F$5)

The method I used to apply this formula range was to create a sparkline from a random selection in the table body and then go back and Edit the sparkline source data as shown below (initially, I had to enter as =LastN1).

A similar formula was made accepting input from cell F6.

I hope that this technique adds to your data visualization portfolio.

You can download the example file here.

Filed under: Excel, Other Tagged: sparkline ]]>

When collecting new links to publish in my Excel Super Links series, I try not to reuse the link in another article. I have been using Windows Explorer (with Windows Indexing enabled) to search the folder where I store these files and look for any files that might contain that link in order to prevent this from occurring. What I wanted was a way to access the File Explorer from the Excel environment. The following procedure performs this task very nicely.

Function WinExplore(TheFolder As String)

On Error Resume Next

Shell “Explorer.exe ” & TheFolder, vbNormalFocus

End Function

This function can be entered in a worksheet cell and when recalculated will open Explorer at the desired folder.

I hope that you find this useful.

Filed under: Excel, VBA Tagged: UDF ]]>

Previously, I discussed the use of a custom list with Data Advanced Filter.

In the article, I only showed one custom list being used in the advanced filter. However, in most situations, a number of specific searches are required. To illustrate this, I combined all of the links from ESL #1-60 in an Excel file. The description of the links are in column A and the links are in column B. The goal is to perform multiple searches with lists while using only a single formula in the advanced filter. A picture of this can be seen in the following figure.

The formula in the advanced filter (B1:B2) on the AdvFilterTable tab is

=SUMPRODUCT(NOT(ISERROR(SEARCH(Choice,A5)))+0)>0

where Choice=CHOOSE(MATCH(AdvFilterTable!$A$2,CritLists,0),PowerBIList,VBAList,ExcelList)

This is the key formula for returning the desired list into the advanced filter formula.It is controlled by cell A2, which uses Data Validation with the following list.

CritLists=LList!$E$2:$E$4

The criteria lists tied to the CHOOSE function are are shown in the following figure.

These are expanding dynamic lists to add additional criteria if necessary.

PowerBIList=OFFSET(LList!$A$1,1,,COUNTA(LList!$A:$A)-1)

VBAList =OFFSET(LList!$B$1,1,,COUNTA(LList!$B:$B)-1)

ExcelList =OFFSET(LList!$C$1,1,,COUNTA(LList!$C:$C)-1)

When a list is selected in cell A2 and the advanced filter is applied to the links table, the result is as shown below.

Functionally, you can search all of my links for the content you desire. Also, you can use this filter model with your own data and criteria. I hope that this is useful.

You can download the file here.

Filed under: Excel, filtering Tagged: Advanced Filter, choose ]]>

I recently published the following article about using a worksheet UDF to modify a shape on the worksheet.

As a brief review, cells B2 and C2 use a data validation list to populate the desired shape and color. Cells G2 and G3 contain the ModifyShape and ModifyShapeColor UDFs.

I have added 2 new features to this powerful technique. The first feature is the ability to change the size of the shape. Entering a value in cells C7 and C8 on the ShapeTest worksheet will change the size of the shape. I have added data validation to those cells to restrict values to the 0.5-2.0 range.

The other feature is the ability to add text to the shape. By entering the text message in cell B13, the new text is added to the shape. The following figure show the layout for the worksheet.

Here is the code for the UDF with the added features.

Function ModifyShape(ShapeNumber, ShapeType, Optional Vis As Boolean = True)

Application.Volatile True

With ActiveSheet.Shapes(ShapeNumber)

.AutoShapeType = ShapeType

.Visible = Vis

.DrawingObject.Characters.Text = Worksheets(“ShapeTest”).Range(“b13”).Value

.Height = .Height * Worksheets(“ShapeTest”).Range(“c7”).Value

.Width = .Width * Worksheets(“ShapeTest”).Range(“c8”).Value

ModifyShape = “done”

End With

End Function

There are a few more features that I plan to add at a future date. Enjoy!

You can download the file here.

Filed under: Excel, VBA Tagged: SHAPES, UDF ]]>

Filed under: Excel Tagged: vbe ]]>

The main procedure for returning exchange rates from Google Finance came from this site.

http://www.codepal.co.uk/show/MS_Excel_Live_Currency_Converter

To use the UDF, under Tools, References in the VBE, scroll down the list and check:

Microsoft WinHttp Services, version 5.1

A table of currency codes and symbols was obtained from this web site.

http://investexcel.net/foreign-exchange-rate-function-in-excel/

The 2^{nd} argument of the UDF (DestCur) is used to lookup the currency symbol associated with the desired currency. The following lines of code illustrate how this is done. In the main module, the following variable is declared.

Global SymbolToLookup As String

This has to be a global variable since it is going to be used in an event procedure in a worksheet module.

The lookup table is on the CurrencySymbols worksheet. This code returns currency symbol to be applied.

SymbolToLookup = Application.WorksheetFunction.Index([CurrencySymbols!C2:C110], Application.WorksheetFunction.Match(DestCur, [CurrencySymbols!B2:B110], 0))

Note the syntax of the two ranges. This is a shorthand method of passing ranges to worksheet functions used in VBA.

Then, the SymbolToLookup variable is passed to the event procedure in the Convert worksheet module, which fires after the UDF is entered in a cell.

Private Sub Worksheet_Change(ByVal Target As Range)

Target.NumberFormat = “General” & SymbolToLookup

End Sub

The following figure shows the result using the UDF plus the event procedure.

The file can be downloaded here.

Filed under: Excel, VBA Tagged: UDF ]]>

Sub RemoveUnusedNumberFormats()

Dim strOldFormat As String

Dim strNewFormat As String

Dim aCell As Range

Dim sht As Worksheet

Dim strFormats() As String

Dim fFormatsUsed() As Boolean

Dim i As Integer

Application.ScreenUpdating = False

If ActiveWorkbook.Worksheets.Count = 0 Then

MsgBox “The active workbook doesn’t contain any worksheets.”, vbInformation

Exit Sub

End If

On Error GoTo Exit_Sub

Application.Cursor = xlWait

ReDim strFormats(1000)

ReDim fFormatsUsed(1000)

Set aCell = Range(“A1”)

aCell.Select

strOldFormat = aCell.NumberFormatLocal

aCell.NumberFormat = “General”

strFormats(0) = “General”

strNewFormat = aCell.NumberFormatLocal

i = 1

Do

‘ Dialog requires local format

SendKeys “{TAB 3}{DOWN}{ENTER}”

Application.Dialogs(xlDialogFormatNumber).Show strNewFormat

strFormats(i) = aCell.NumberFormat

strNewFormat = aCell.NumberFormatLocal

i = i + 1

Loop Until strFormats(i – 1) = strFormats(i – 2)

aCell.NumberFormatLocal = strOldFormat

ReDim Preserve strFormats(i – 2)

ReDim Preserve fFormatsUsed(i – 2)

For Each sht In ActiveWorkbook.Worksheets

For Each aCell In sht.UsedRange

For i = 0 To UBound(strFormats)

If aCell.NumberFormat = strFormats(i) Then

fFormatsUsed(i) = True

Exit For

End If

Next i

Next aCell

Next sht

‘ Suppress errors for built-in formats

On Error Resume Next

For i = 0 To UBound(strFormats)

If Not fFormatsUsed(i) Then

‘ DeleteNumberFormat requires international format

ActiveWorkbook.DeleteNumberFormat strFormats(i)

End If

Next i

Application.ScreenUpdating = True

Exit_Sub:

Set aCell = Nothing

Set sht = Nothing

Erase strFormats

Erase fFormatsUsed

Application.Cursor = xlDefault

End Sub

Continue watching here for the application I am making that needed this.

Filed under: Excel, VBA Tagged: custom format ]]>

Option Explicit

Sub GetTheList()

Dim N&, Count&, MyList(2000), List$

Dim Component As Variant

For Each Component In ActiveWorkbook. _

VBProject.VBComponents

With Component.CodeModule

Count = .CountOfDeclarationLines + 1

Do Until Count >= .CountOfLines

MyList(N) = .ProcOfLine(Count, _

vbext_pk_Proc)

Count = Count + .ProcCountLines _

(.ProcOfLine(Count, vbext_pk_Proc), _

vbext_pk_Proc)

ActiveSheet.Range(“a” & N).Value = .Name

ActiveSheet.Range(“b” & N).Value = MyList(N)

List = List & vbCr & MyList(N)

If Count < .CountOfLines Then N = N + 1

Loop

End With

N = N + 1

Next

End Sub

HTH!

Filed under: Excel, VBA Tagged: vbe ]]>

I decided to explore other applications that speak. The most logical choice was to make an Excel Translator. After searching the net, I found a good source for this.

The core VBA procedure came from Santosh

https://stackoverflow.com/users/2227085/santosh

in the following discussion.

https://stackoverflow.com/questions/19098260/translate-text-using-vba

There are a number of procedures that perform the same operation. However, none of them had a source of language codes to see, making them difficult to use without an external reference. Luckily, Microsoft has published a comprehensive list at:

https://msdn.microsoft.com/en-us/library/cc233982.aspx

I used Power Query to get the table from this site, load it in a worksheet, then unlink it from the query since it is a static table. I then modified the code to allow information to be looked up from the table to be used as part of the procedure. The complete code is here, with the underlined portions add by me.

Function Translate(str As String, __lCode As String__)

Dim IE As Object, i As Long

Dim inputstring As String, outputstring As String, text_to_convert As String, result_data As String, CLEAN_DATA

Set IE = CreateObject(“InternetExplorer.application”)

inputstring = “auto”

outputstring = __lCode__

text_to_convert = str

__LangToLookup = Application.WorksheetFunction.Index([LCodes!b2:b150], Application.WorksheetFunction.Match(lCode, [LCodes!A2:A150], 0))__

IE.Visible = False

IE.navigate “http://translate.google.com/#” & inputstring & “/” & outputstring & “/” & text_to_convert

Do Until IE.ReadyState = 4

DoEvents

Loop

Application.Wait (Now + TimeValue(“0:00:5”))

Do Until IE.ReadyState = 4

DoEvents

Loop

CLEAN_DATA = Split(Application.WorksheetFunction.Substitute(IE.document.getElementById(“result_box”).innerHTML, “</SPAN>”, “”), “<“)

For j = LBound(CLEAN_DATA) To UBound(CLEAN_DATA)

result_data = result_data & Right(CLEAN_DATA(j), Len(CLEAN_DATA(j)) – InStr(CLEAN_DATA(j), “>”))

Next

IE.Quit

Translate = result_data

__Application.Speech.Speak (“In ” & LangToLookup & “, ” & str & “means” & Translate)__

End Function

The 2^{nd} argument of the TRANSLATE function was added, and the appropriate codes for that argument can be viewed on the LCodes worksheet. That variable was used with outputstring = lCode.

The following line of code returns the language name from the table.

LangToLookup = Application.WorksheetFunction.Index([LCodes!B2:B150], Application.WorksheetFunction.Match(lCode, [LCodes!A2:A150], 0))

The last line of code reads the information out loud.

Application.Speech.Speak (“In ” & LangToLookup & “, ” & str & “means” & Translate)

The result of using this function on the worksheet is shown below.

Be aware that some of the codes will not return a spoken phrase because of character differences (such as Hebrew).

You can download the file here.

Filed under: Excel, VBA Tagged: speak ]]>

Starting in cell AK2, the names of the teams in the tournament are listed. For every name entered, a consecutive number must also be entered, starting with 0 in cell AL2. See the following figure.

And, that’s all you have to do!

The process runs entirely on Excel formulas – no VBA is used.

The resulting tournament schedule is shown in the following figure (partial view).

The workbook is completely unprotected, so feel free to discover how to works. There are a number of interesting and complex formulas used in the design of this model, both on the worksheet, in conditional formatting and in defined name formulas.

It is difficult to visualize the entire tournament bracket at once. Perhaps I will leave that issue as an exercise for the user.

The file can be downloaded here.

Enjoy!

Filed under: conditional formatting, Excel Tagged: formulas ]]>

I demonstrated a method of obtaining unique items from a 3D range. At the time that this article was written, I was unaware that the TEXTJOIN function accepted native 3D references. See:

The techniques needed to convert a delimited string to a unique delimited string have already been discussed.

So, with the starting point of a delimited string obtained by using 3D reference with TEXTJOIN, the link above will then allow you to create the unique array or delimited string.

To be clear, first TEXTJOIN is used with a 3D range argument to make a delimited string. Then, that string is used in the formula construction described in the link above to make an array of unique items, which can be subsequently used to make a unique delimited string.

Remember again, that you have to have the Excel version included in Office 365 in order for the TEXTJOIN formula to work.

Filed under: Excel, TEXTJOIN Tagged: formulas ]]>

http://wordfinder.yourdictionary.com/unscramble/

All credit for the working of the query demonstrated here goes to the aforementioned website.

So, I copied the URL of the query and found a way to use it in Power Query. I needed a way to add the string to the query, so I created an Excel table (named Letters) where the string would originate from.

Then, I was able to create M code that used the concatenated query and returned the output to the worksheet.

See:

let

QSource = Excel.CurrentWorkbook(){[Name=”Letters”]}[Content],

QText = QSource{0}[#”What Letters Do You Have?”],

Webstring = “http://wordfinder.yourdictionary.com/unscramble/”&QText,

Source = Web.Page(Web.Contents(Webstring)),

#”Removed Bottom Rows” = Table.RemoveLastN(Source,1),

#”Expanded Data” = Table.ExpandTableColumn(#”Removed Bottom Rows”, “Data”, {“Word”, “Scrabble® Points”}, {“Word”, “Scrabble® Points”}),

#”Removed Columns” = Table.RemoveColumns(#”Expanded Data”,{“Caption”, “Source”, “ClassName”, “Id”}),

#”Changed Type” = Table.TransformColumnTypes(#”Removed Columns”,{{“Word”, type text}, {“Scrabble® Points”, Int64.Type}})

in

#”Changed Type”

Here is an example of what the worksheet looks like after running it.

I was having trouble refreshing the query, so I asked Excel MVP and Power Query guru Ken Puls http://www.excelguru.ca/ for some help. This is the event procedure he came up with to refresh the query from the ListObjects(“Letters”) table.

Option Explicit

Private Sub Worksheet_Change(ByVal Target As Range)

On Error Resume Next

If Not Intersect(Target, ListObjects(“Letters”).DataBodyRange) Is Nothing Then

ListObjects(“IsWord”).QueryTable.Refresh BackgroundQuery:=False

End If

End Sub

Shortly after making this Power Query Scrabble Words app, I discovered a website where an Excel-based Scrabble game was available.

http://www.dustinormond.com/blog/vba-scrabble/

I started playing this game and connected the letters from that game to the Scrabble Words app with external links. In order to control the process, I used a formula to concatenate the linked letters (in I2:Q2) to make the string needed for the query.

=IF(I3=””,I2,I3)&IF(J3=””,J2,J3)&IF(K3=””,K2,K3)&IF(L3=””,L2,L3)&IF(M3=””,M2,M3)&IF(N3=””,N2,N3)&IF(O3=””,O2,O3)&IF(P3=””,P2,P3)&IF(Q3=””,Q2,Q3)

In the model I am sharing with you, there are no external links for obvious reasons. But, if there were blank tiles, then I could replace the blank with a letter (i.e. – L2 is blank and the letter in L3 would take its place. The only drawback is that the formula in G2 has to be recalculated for the Power Query query to refresh. This can be done by clicking in G2 and hitting Enter.

But, as I was starting work on this article, I went back to the source web site and discovered something I had overlooked. Wildcards (2 of them) can be used in the query! On that site, they use question marks as wildcard characters, but the query I made will only work with an underscore. So, in the following figure, I demonstrate how this is done.

Whether you use this for playing (cheating at) Scrabble or just to use the generated words in some other way, I think that you will find this technique to be very useful.

Unfortunately, I do not have permission from the website for file download, but I still hope that you find this information useful.

Filed under: Excel, Power BI, VBA Tagged: Power Query ]]>

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

textInCell = Target.Value

If textInCell = “” Then Exit Sub

For n = 1 To Len(textInCell)

If Asc(Mid(textInCell, n, 1)) > 64 And Asc(Mid(textInCell, n, 1)) < 91 Then

Application.Speech.Speak “Capital ” & Mid(textInCell, n, 1)

Else

Application.Speech.Speak Mid(textInCell, n, 1)

End If

Next

Application.Speech.Speak (“spells ” & textInCell)

End Sub

Then, select a cell on the worksheet and if it contains a word it will spell the word and then say it. In the example file, A1 contains the word “Elephant”. If that cell is selected, it will be spelled out starting with “capital E” followed by the rest of the letters and then says “spells Elephant”.

You can download the file here. It also contains a greeting upon opening the workbook.

Filed under: Excel, VBA Tagged: speak ]]>

There is a Data Validation list option in cell B2, with the list in A1:A2 (On, Off). Then, a conditional format is applied to A4:G10 with the formula =IF($B$2=”Off”,1,0).

The important part of this process is selecting formatting options that look “normal”, such as no fill, no borders and a black font. When the Off value is selected, the formatting of the table “disappears”, as shown below.

You can download the example file here.

Filed under: conditional formatting, Excel ]]>

=IF(A5>=90,”A”,IF(A5>=80,”B”,IF(A5>=70,”C”,IF(A5>=60,”D”,”F”))))&IF(A5>98,”+”,IF(A5<59,””,IF(OR(RIGHT(A5,1)={“1″,”2″,”0″}),”-“,IF(OR(RIGHT(A5,1)={“8″,”9″}),”+”,””))))

Filed under: Excel Tagged: formulas ]]>

The ProjSetup worksheet is for data input. Column A is for the names of the projects to track. Column B is for the starting date of the project and Column C is for the finish date of the project. Column D is the priority of the project – low, medium or high. A Data Validation list allows for those values to be selected, and conditional formatting determines the color. Column F has an option box to select between days and weeks. The following figure shows these features.

The ProjTimeDisplay worksheet shows the project time schedules. This was constructed with Excel formulas and conditional formatting. Feel free to dig in to see how it works. Here is a figure to visualize the output.

The project workbook can be downloaded here.

Filed under: Excel Tagged: formulas ]]>

https://support.office.com/en-us/article/TEXTJOIN-function-357b449a-ec91-49d0-80c3-0e8fc845691c

it shows an example at the bottom of the article where the 1^{st} argument of the TEXTJOIN function uses multiple delimiters. I knew that multiple delimiters could be used, but I could not think of an example where that might be useful. Then, I decided that it did have a useful purpose if it resulted in a desirable display result. So the first example is:

=TEXTJOIN(A7:D7, TRUE, A2:D6) where A7:C7 contains commas and D7 contains the formula =CHAR(10).

As you can see in the figure, each record appears to be on a single line in the cell (F9).

This same technique can be enhanced further in this way.

=TEXTJOIN(A8:D8, TRUE, A2:D6) where A7:C7 contains commas and D7 contains the formula

=CHAR(10)&REPT(“-“,CELL(“width”,H9)+NOW()*0)&CHAR(10).

With the TEXTJOIN formula example in cell H9, the appearance of the created string makes it very easy to see (in the following figure) each record.

The example file can be downloaded here.

Filed under: Excel, TEXTJOIN ]]>

=TEXTJOIN(“,”,,Sheet1:Sheet2!A1:A2)

I continue to be amazed by the myriad of formula solutions made possible by the TEXTJOIN function. In a recent article where I demonstrated the use of non-contiguous ranges

I now realize that the same concept can be used with 3D ranges. (Here is the bonus!) In fact, that 3D range can be in ANOTHER workbook, as shown below.

=TEXTJOIN(“,”,,Sheet1:Sheet2!A1:A2,[TEXTJOIN_Native3DB.xls]Sheet1:Sheet2!A1:A2)

The example file can be downloaded here (Note: I did not include the external file, and I put a tilde in front of that formula)

Remember again, that you have to have the Excel version included in Office 365 in order for the TEXTJOIN formula to work.

Filed under: Excel, TEXTJOIN Tagged: 3D ]]>

This article demonstrated a method of returning latitude and longitude coordinates from an address

http://analystcave.com/excel-get-geolocation-coordinates-of-an-address/

and this article showed how to return an elevation from latitude and longitude coordinates.

http://oco-carbon.com/coding/altitude-in-excel-google-elevation-api/

So, I decided to combine the techniques from both articles to create an UDF that would use an address to give the elevation of that location. The first line of code illustrates the function arguments.

Function ElevationFromAddress(address As String, Optional ToFeet As Boolean) As Double

An address string is the 1^{st} argument and there is an optional 2^{nd} boolean argument for coverting meters to feet. Please feel free to download the example file containing the complete code for the UDF

The Google API algorithm can recognize locations with limited or detailed address information. The first two records in the table are for locations at a considerable altitude. The next record is for a Baptist seminary in Fort Worth, Tx. The last records are both for The White House in Washington, D.C. Note that the values are different – the first record must be for the front gate while the generic address refers to the actual building. As shown in the figure, the formulas in column B use the 2^{nd} optional argument to return the elevation in feet.

This function procedure requires a reference to Microsoft XML, v6.0, selected in the VBE under Tools, References, as shown here.

The file can be downloaded here.

Filed under: Excel, VBA Tagged: Google API, UDF ]]>

=TODAY() ‘in cell A1

=INDEX(A1+ROW($1:$40),MATCH(1,(DAY(A1+ROW($1:$40))>14)*(DAY(A1+ROW($1:$40))<22)*(WEEKDAY(A1+ROW($1:$40))=5),0))+1 ‘formula in A2 and fill down.

This will afford the list of option expiration dates. In order to see triple witching option expiration dates, this conditional formatting formula must be used on the date list.

Triple=NOT(MOD(MONTH(A2),3)) ‘defined when active cell is A2.

For the first cell, a different conditional formatting formula is needed. With A1 as the active cell, define Start:

=OR(A1=INDEX(A1+ROW($1:$40),MATCH(1,(DAY(A1+ROW($1:$40))>14)*(DAY(A1+ROW($1:$40))<22)*(

WEEKDAY(A1+ROW($1:$40),11)=5),0))-28, A1=INDEX(A1+ROW($1:$40),MATCH(1,(DAY(A1+ROW

($1:$40))>14)*(DAY(A1+ROW($1:$40))<22)*(WEEKDAY(A1+ROW($1:$40),11)=5),0))-35)

When the conditional format is applied to cell A1, the characters will appear as bold purple in the model when that date is an options expiration date. In order to see triple witching option expiration dates in A1, this additional conditional formatting formula was used to hightlight bold red text if A1 contains a triple witching date.

=AND(Triple,Start)

You can download the file here.

Filed under: conditional formatting, Excel Tagged: formulas ]]>

https://support.office.com/en-us/article/TEXTJOIN-function-357b449a-ec91-49d0-80c3-0e8fc845691c

you will find that there are multiple text arguments that are optional for TEXTJOIN. They have the same properties as the 3^{rd} argument, which allows for an array of strings. So, the following formula has 3 non-contiguous ranges as its last 3 arguments.

=TEXTJOIN(“,”,TRUE,A1:A10,C1:C10,E1:E10)

which affords

a,b,c,a,b,c,a,b,c,a,c,d,e,c,d,e,c,d,e,c,e,f,g,e,f,g,e,f,g,e

Note that this comma delimited string obtained from the TEXTJOIN function is the starting point of the technique demonstrated in this article.

So, for example, you can use non-contiguous ranges as the starting point for making an unique array or unique delimited string. Pretty neat and powerful stuff!

Remember again, that you have to have the Excel version included in Office 365 in order for the TEXTJOIN formula to work.

Filed under: Excel, TEXTJOIN Tagged: formulas ]]>

http://dailydoseofexcel.com/archives/2012/05/05/copy-chart-as-a-picture/#comments

The code from that article is shown here.

Declare Function OpenClipboard Lib “user32” (ByVal hwnd As Long) As Long

Declare Function CloseClipboard Lib “user32” () As Long

Declare Function GetClipboardData Lib “user32” (ByVal wFormat As Long) As Long

Declare Function EmptyClipboard Lib “user32” () As Long

Declare Function CopyEnhMetaFileA Lib “gdi32” (ByVal hENHSrc As Long, ByVal lpszFile As String) As Long

Declare Function DeleteEnhMetaFile Lib “gdi32” (ByVal hemf As Long) As Long

Const CF_ENHMETAFILE As Long = 14

Const cInitialFilename = “Picture1.emf”

Const cFileFilter = “Enhanced Windows Metafile (*.emf), *.emf”

Public Sub SaveAsEMF()

Dim var As Variant, lng As Long

var = Application.GetSaveAsFilename(cInitialFilename, cFileFilter)

If VarType(var) <> vbBoolean Then

On Error Resume Next

Selection.Copy

OpenClipboard 0

lng = GetClipboardData(CF_ENHMETAFILE)

lng = CopyEnhMetaFileA(lng, var)

EmptyClipboard

CloseClipboard

DeleteEnhMetaFile lng

On Error GoTo 0

End If

End Sub

You can download the file containing this procedure here.

Important note: This solution will run correctly only on 32-bit systems – not 64-bit. If you really need it to work on 64-bit, you can try to modify the code based on the information located at:

http://www.jkp-ads.com/articles/apideclarations.asp

Filed under: Excel, VBA Tagged: api ]]>

I wanted to see if the same formula worked in Power BI. When I entered the aforementioned formula into a calculated column in Power BI desktop, I got an error message. After some research, I discovered that was no CHAR function in the DAX function reference. Then, I remembered that Chris Webb showed examples of the new UNICHAR function at the following link.

And, Chris discovered that the UNICHAR function was completely undocumented and was probably introduced in the April 2017 update. So, I changed my random initials formula using UNICHAR instead of CHAR, and it worked.

=UNICHAR(INT(RAND()*26)+65)&UNICHAR(INT(RAND()*26)+65)&UNICHAR(INT(RAND()*26)+65)

Now, you can use this in your Power BI projects.

It is still a mystery how DAX could be around for 8 years and not have the CHAR function (or its equivalent).

Filed under: Excel, Power BI, PowerPivot DAX ]]>

=CHAR(INT(RAND()*26)+65)&CHAR(INT(RAND()*26)+65)&CHAR(INT(RAND()*26)+65)

Type this formula into a cell and copy it by using the fill handle into the # of cells desired. These initials will change each time the spreadsheet is recalculated unless you freeze the values. This can be done by selecting the range containing the initials and choosing EDIT || COPY, then EDIT || PASTE SPECIAL.Click the values option and press Enter.

This formula does not calculate as (I) expected. In my experience, the use of the RAND function in a formula can only return one random number. However, in this case, Excel apparently calculates each of the 3 parts of the formula as a distinct formula.

Filed under: Excel Tagged: formulas ]]>

=AVERAGE(range) ‘returns 109.6014

=STDEVP(range) ‘returns 6.42546

These values can be used to create the statistical deviations needed in the chart. However, it is more desirable to recalculate those values based on a dataset without outliers. This is accomplished by the following array formulas.

=AVERAGE(IF((range<(AVERAGE(range)+(STDEVP(range)*3)))*(range>(AVERAGE(range)-(STDEVP(range)*3)))*range=0,””,range)) ‘returns 109.4274

=STDEVP(IF((range<(AVERAGE(range)+(STDEVP(range)*3)))*(range>(AVERAGE(range)-(STDEVP(range)*3)))*range=0,””,range)) ‘returns 6.09267

The formulas needed to construct the control chart are typified by the following, which returns minus 3 deviations (in column I in the example worksheet).

=CHOOSE(Which,$E$2-3*$E$3,$F$2-3*$F$3)

where Which is the name of the cell (H2) containing a data validation dropdown with a list consisting of 1 and 2 and the two choices are the calculation for raw data and modified data respectively. So, there are different formulas in C6:I6 that are filled down to create the dataset used to make the control chart shown in the figure.

I hope that you found the techniques used here informative. But, the best part of this is that you can use your data (defined as range) to visualize your data from both a raw and modified perspective in the control chart.

Note: you can turn the calculations in your control chart data set to values if you have no further plan to add data later.

You can download the control chart example file here.

Filed under: Excel Tagged: charting ]]>

Excel For You Blog Posts With Files Thru 051617

I hope that this makes it easier for you to locate the content you are interested in.

Filed under: Excel Tagged: download ]]>

http://dailydoseofexcel.com/archives/2012/05/25/copy-unique-values/

as per his instructions:

Select the range to extract from

Hold down the Alt key

Press these keys in sequence: d, f, a, r, o, t

Release the Alt key

Select the range to paste the unique values to.

The only caveat to this approach that I found is that when Excel does not recognize that the selection has headers, it will stop at an intermediary stage. Then, you can click the appropriate options to finish the unique items copy.

HTH!

Filed under: Excel Tagged: Advanced, filter, Unique ]]>

https://www.edwardtufte.com/bboard/q-and-a-fetch-msg?msg_id=000AI

The inspiration for the implementation of sparklines in Excel actually came from Excel developer Rob van Gelder. In this article

http://dailydoseofexcel.com/archives/2006/02/05/in-cell-charting/

he shares the VBA code for the LineChart user-defined function, which places a chart in the cell where the function is called from. You can view the use of this UDF and the VBA code in this example file.

If you are not familiar with Excel’s built-in sparkline feature, you can read the following Microsoft article.

Filed under: Excel, VBA Tagged: sparkline ]]>

https://twitter.com/TomUrtis/status/863092107564638208

I used to play with the 3^{rd} argument of the MATCH function many years ago, but I gave it up as a lost cause because strange results were returned if the column in question had blank cells in it. However, if used in a contiguous list, Tom demonstrated its utility in the following formula.

=MATCH(2,1/(Table1[Name]=”Urtis”))

If the 3^{rd} argument of the MATCH is not declared, it defaults to a value of 1. That allows for a lookup that is equal to or less than the 1^{st} argument. The undocumented feature of the 3^{rd} argument is that when the value is 1 it does the lookup from the bottom of the data rather than the top. So, Tom’s formula finds the LAST matching item (in cell A44 in the example workbook).

I realized that this technique could be extended to multiple criteria. The following formula shows 2 criteria

=MATCH(2,1/((Table1[Name]=”Urtis”)*(Table1[Type]=”b”)))

and this formula shows 3 criteria.

=MATCH(2,1/((Table1[Name]=”Urtis”)*(Table1[Type]=”b”)*(Table1[Total]<300)))

It is important to note that the criteria can be from any column in a table, and just not adjacent rows.

Note also that the formulas return the row position in the table.

This technique can also be used for visualizing the row matching the criteria by conditional formatting (CF).

This is the conditional formatting formula used for 3 criteria.

Criteria3=ROW()=ROW(INDIRECT(“A”&MATCH(2,1/((Table1[Name]=”Urtis”)*(Table1[Type]=”b”)*(Table1[Total]<300)))+1))

This CF formula is applied to the entire table and highlights row 21 as expected.

As a further extension of this technique, a criteria table can be used that replaces the static criteria with values from the table, as shown below.

=MATCH(2,1/(Table1[Name]=F2))

=MATCH(2,1/((Table1[Name]=F2)*(Table1[Type]=G2)))

=MATCH(2,1/((Table1[Name]=F2)*(Table1[Type]=G2)*(Table1[Total]<H2)))

So, there are a number of ways to use this technique. Thanks Tom, for the idea.

You can download the file here.

Filed under: conditional formatting, Excel Tagged: conditional formatting, formulas ]]>

However, there is another way to add a comment to a cell containing a formula. The N function returns a value of zero if the argument is a string (i.e. – =N(“Hi”) equals zero), so it does not affect the value of the main formula.

So, the formula to add the comment to is:

=MATCH(TRUE,ISNUMBER(FIND(“s”,$A$1:$A$20)),0)

which is an interesting formula in its own right but a discussion of it is not germane to this article.

This is the formula with the comment attached.

=MATCH(TRUE,ISNUMBER(FIND(“s”,$A$1:$A$20)),0)+N(“This formula created 05/11/17 by me.”)

In order to locate formulas of this type, a special conditional formatting formula is needed.

The formula needed to create the conditional format for cells containing formulas & documented by the N function is shown below (defined with D5 as the active cell).

HasFormulaComment=FIND(“+N(“””,FORMULATEXT(D5))

A notable feature of this formula is that since a quote is to be part of the lookup string +N(“ then a triple quote is required by Excel at the end of the string.

In the figure below, this conditional fomat is applied to column D.

For D5, this formula returns a value of 47. If it returns an error or 0, then the CF condition is FALSE. So, only cell D5 in column D is highlighted.

You can download the example file here.

Filed under: Excel Tagged: conditional formatting ]]>

Function Env(Lposition As Variant)

Env = Environ(LPosition)

End Function

It is important to note that the variable Lposition is declared as a Variant so that both numeric and built-in Excel strings can be used by this UDF. I could not find a list of the strings on the net, but in this example I will show you how to make a list. The values listed below are for my computer.

A1: =Env(ROW()) returns ALLUSERSPROFILE=C:\ProgramData

B1: =LEFT(A1,FIND(“=”,A1)-1) returns ALLUSERSPROFILE

C1: =Env(B1) returns C:\ProgramData

Note that in B1 is the built-in string argument used by C1.

You can download the file here.

When you do, fill A1:C1 down to row 40 on the worksheet to make the environmental variable table for your computer. Column B will contain the built-in strings. I hope that you find this useful.

Filed under: Excel, VBA Tagged: UDF ]]>

I decided to build a model based on frequency.

The first formula used is the aforementioned most frequent item formila.

=INDEX(ListRange,MODE(MATCH(ListRange,ListRange,0)))

where ListRange = A2:A16

Then, another formula was needed to return subsequent frequent items,

=INDEX(ListRange,MODE(IF(COUNTIF($E$2:E2,ListRange)=0,MATCH(ListRange,ListRange,0))))

entered into cell E3 and copied down.

The formula to return the number for each item was entered in F2 and copied down.

=COUNTIF(ListRange,E2)

The amount spent on each transaction type was calculated the formula placed in G2 and copied down.

=SUM(IF(ListRange=E2,Total,0))

where Total = B2:B16

Finally, information can be used columns F & G to make a formula that will return the average for each transaction type.

=ROUND(G2/F2,2)

The finished table is shown in the following figure.

The frequency table file can be downloaded here.

Filed under: Excel Tagged: formulas ]]>

=INDEX(ListRange,MODE(MATCH(ListRange,ListRange,0)))

where ListRange is a single column range.

Filed under: Excel Tagged: formulas ]]>

Unfortunately, although the units are in category order, there is no way to see a category description.

The tables containing the units used by the CONVERT function can be found at the following link.

https://support.office.com/en-us/article/CONVERT-function-D785BEF1-808E-4AAC-BDCD-666C810F9AF2

That data was imported, messaged and cleansed to make the list found in the Info worksheet, adding a category for each record in the list. I then used the Advanced Filter to make a list of unique items from column A. That is the primary list used in the calculation model (on the Convert worksheet).

Type=Convert!$C$2

And is used as a data validation dropdown in

Category=Convert!$C$2

The workbook also provides a good example of creating dependent dropdowns from a list. A great formula used to do this is shown below:

CategoryDep=INDIRECT(“Info!C”&MATCH(Category,Info!$A$1:$A$93,0)&”:C”&MAX(IF(Category=Info!$A$2:$A$93,ROW(Info!$A$2:$A$93))))

This data validation list formula is used in the dropdowns in E2 and F2.

From =Convert!$E$2

To =Convert!$F$2

In the example workbook, the cells that are formatted as light blue have Data Validation dropdowns that allow categories to be used with the unit selections for the CONVERT function. So, the dropdown in C2 is used to select the category, and the dropdowns in E2 and F2 are used as the 2^{nd} and 3^{rd} arguments in the CONVERT function in cell A2.

Note that this technique does not include the Prefix and Binary Prefix categories.

It is also important to note that since the unit information used here is in a worksheet list, we are not bound by the examples provided by Microsoft. However, a different calculation mode would have to be used, since the custom unit symbols would not be recognized by the CONVERT function. I plan to look at using a formula like =PRODUCT(number,multiplier) for the custom categories. Feel free to use this idea to build your own custom examples. I will be working on it, too .

You can download the file here.

Filed under: Excel Tagged: data validation, dropdown ]]>

There are no examples of the formulas referred to in this text in the working xl file, but you should be able to construct your own, based on the following information. Be aware that this methodology uses xlm in defined name formulas. Therefore, do not change the file type. Read all instructions before using.

You can download the instruction document and the working file here.

MagicCons document MagicCons xl file

Filed under: Excel Tagged: formulas ]]>

https://exceloffthegrid.com/autocorrect-hack-to-speed-up-data-entry/

I thought that it would be useful to make a way to automate this process. So, I created the following VBA function procedure (put in a general module in VBE).

Function AutoCorrectAdd(ReplaceWhat As String, ReplaceWith As String)

Application.AutoCorrect.AddReplacement What:=ReplaceWhat,Replacement:=ReplaceWith

End Function

So, if cell A2 contained RobC and B2 contained https://powerpivotpro.com/, then the formula

= AutoCorrectAdd(A2,B2), run in a worksheet UDF

would add that autocorrect replacement the built-in AutoCorrect list. If you then type RobC, it would be replaced by https://powerpivotpro.com/.

You could also use this function in a Sub procedure. Say that you had an Excel list of nicknames and their corresponding e-mail addresses. You could create a Sub that operated on each row of the two column list with the AutoCorrectAdd function to convert the list to autocorrect replacements (not shown, a challenge to the reader ).

Hope that you find this useful.

Filed under: Excel, VBA Tagged: autocorrect, VBA ]]>

Originally, I thought of creating an UDF with VBA that could be used as the CF Boolean formula. Then, I remembered the new Excel FORMULATEXT function and wondered whether it would return the “curly brackets” from a cell containing an array formula. I doubted that it would, but it did! So, I made a defined named formula (with E6 as the active cell) as shown in the figure below.

The formula, IsArrayFormula=LEFT(FORMULATEXT(E6),1)=”{“, is True if the first character in the string is a left curly bracket. Then, I was able to use that formula as a conditional format, as shown below.

Now, if this technique is used in auditing Excel workbooks, the cells containing array formulas will be able to be easily viewed.

The example workbook can be downloaded here.

Filed under: Excel Tagged: conditional formatting, FORMULATEXT ]]>

http://stackoverflow.com/questions/828496/how-to-retrieve-this-computers-ip-address

Make sure that you have the required reference (WMI Scripting) selected under Tools, References in the VBE as shown in the figure below.

Copy/paste the following code to a general module in the VBE and then type =GetIPAddress() into a worksheet cell (or, use it in a VBA procedure).

Function GetIPAddress()

Const strComputer As String = “.” ‘ Computer name. Dot means local computer

Dim objWMIService, IPConfigSet, IPConfig, IPAddress, i

Dim strIPAddress As String

‘ Connect to the WMI service

Set objWMIService = GetObject(“winmgmts:” _

& “{impersonationLevel=impersonate}!\\” & strComputer & “\root\cimv2”)

‘ Get all TCP/IP-enabled network adapters

Set IPConfigSet = objWMIService.ExecQuery _

(“Select * from Win32_NetworkAdapterConfiguration Where IPEnabled=TRUE”)

‘ Get all IP addresses associated with these adapters

For Each IPConfig In IPConfigSet

IPAddress = IPConfig.IPAddress

If Not IsNull(IPAddress) Then

strIPAddress = strIPAddress & Join(IPAddress, “, “)

End If

Next

GetIPAddress = strIPAddress

End Function

HTH!

Filed under: Excel, VBA Tagged: Excel, ip, VBA ]]>

Function PickRandomFromList(rList As Range, sArray As Integer) As Variant

Dim N As Long

Dim Arr() As Variant

Dim lArr() As Variant

Dim Temp As Variant

Dim J As Long

Application.Volatile False

Arr = rList.Value

Randomize

ReDim lArr(LBound(Arr) To sArray

For N = 1 To sArray

J = CLng(((UBound(Arr) – N) * Rnd) + N)

Temp = Arr(N, 1)

lArr(N) = Arr(J, 1)

Arr(J, 1) = Temp

Next N

PickRandomFromList = lArr

End Function

It is important to note that this UDF does not recalculate with every change in the worksheet by using the line of code Application.Volatile False. It will only recalculate if a change is made in the cell containing the formula or in the specified worksheet range. The conversion of the array to a delimited list is done through the use of the TEXTJOIN function.

=TEXTJOIN(“,”,,PickRandomFromList(A2:A22,5))

This technique may be particularly useful for the selection of random committees from an employee list. I hope that this will give you some ideas about situations requiring random sampling.

You can download the workbook here.

Filed under: Excel, VBA Tagged: Excel, TEXTJOIN, VBA ]]>

Copy/paste it into a general module in the VBE.

Public Function ZodiacSign(BirthDate As Date) As String

Dim iDayofYear As Integer

iDayofYear = DateDiff(“d”, CDate(“1/1/” & Year(BirthDate)), BirthDate) + 1

If Year(BirthDate) Mod 4 = 0 And iDayofYear > 59 Then

iDayofYear = iDayofYear – 1

End If

If iDayofYear < 20 Then

ZodiacSign = “Capricorn”

ElseIf iDayofYear < 50 Then

ZodiacSign = “Aquarius”

ElseIf iDayofYear < 81 Then

ZodiacSign = “Pisces”

ElseIf iDayofYear < 111 Then

ZodiacSign = “Aries”

ElseIf iDayofYear < 142 Then

ZodiacSign = “Taurus”

ElseIf iDayofYear < 173 Then

ZodiacSign = “Gemini”

ElseIf iDayofYear < 205 Then

ZodiacSign = “Cancer”

ElseIf iDayofYear < 236 Then

ZodiacSign = “Leo”

ElseIf iDayofYear < 267 Then

ZodiacSign = “Virgo”

ElseIf iDayofYear < 297 Then

ZodiacSign = “Libra”

ElseIf iDayofYear < 327 Then

ZodiacSign = “Scorpio”

ElseIf iDayofYear < 357 Then

ZodiacSign = “Sagittarius”

Else

ZodiacSign = “Capricorn”

End If

End Function

When entered in a worksheet cell (=ZodiacSign(A1)), where A1 contains the birthdate in question, the correct sign of the zodiac will be returned. Note that this part of the function code

If Year(BirthDate) Mod 4 = 0 And iDayofYear > 59 Then

iDayofYear = iDayofYear – 1

End If

adjusts the day of year if the year of birth is a leap year.

Filed under: Excel, VBA Tagged: UDF ]]>

The original idea was posted in 2007. I seem to remember, though, that the use of a UDF to modify cells occurred before that time. The initial discovery was that a UDF could add a cell comment to ANY cell. I can’t find the original reference, but this technique was last documented at:

http://www.listendata.com/2013/04/excel-udf-dependent-cell-comment.html

I have modified the the UDF shown in that article to add a timestamp feature.

Function AddComment(rng As Range, str As String) As String

If Not rng.Comment Is Nothing Then rng.Comment.Delete

TimeStamp = Date & ” ” & Time

If Len(str) Then rng.AddComment.Text str & ” ” & TimeStamp

rng.Comment.Visible = True

End Function

In the example workbook, I entered the AddComment function in cell D6, but the range argument can point to any cell. In fact “range formulas” can also be used.

The INDEX, OFFSET and INDIRECT Excel functions all return ranges, so any formulas built with these functions can be used in a UDF where a range argument is required. The following example uses the INDEX function.

=AddComment(INDEX(NumRange,MATCH(MAX(NumRange),NumRange,0)),”MAX value in NumRange”)

where NumRange is defined as =OFFSET(A$1,,,COUNTA($A:$A),) ‘auto-expanding range

In this example, the formula INDEX(NumRange,MATCH(MAX(NumRange),NumRange,0)) returns the range of the cell containing the max value of NumRange, and as such it can be used in the first argument of the UDF. So, as numbers are added to column A as shown in the figure

the function will add a timestamped comment to any cell in that range that is the max value.

Obviously, there are numerous and more complex examples that can be built using this technique. I hope that you will find this useful in your projects.

The example file can be downloaded here.

Filed under: Excel, VBA Tagged: COMMENT, Excel, UDF, VBA ]]>

https://www.extendoffice.com/documents/excel/1539-excel-highlight-external-links.html

but it required a VBA solution. Now, with Excel’s new FORMULATEXT function, it can be accomplished using only Excel formulas. So, using the following formula defined as IsExternalLink

=FIND(“[“,FORMULATEXT(D10))

Conditional formatting will highlight the cells containing “[“, which is associated with external link formulas. But, a more robust formula can also be used, as shown below.

=FIND(“[“,FORMULATEXT(D10))+FIND(“]”,FORMULATEXT(D10))

Filed under: Other ]]>

“Since I never use a direct reference (or, come to that, enter a formula without naming the range to which it applies) any 3D reference I might use would pass under the radar. Unless, of course, you have an array UDF which will parse the formula to yield a set of references; in which case can I put in an order?”

Initially, I replied that it was not possible. But, the challenge was irresistable. I started working on the problem and, after a number of dead-ends, I was able to come up with a solution. It required a VBA function to return an array of defined names.

Function DefinedNameArray() As Variant

Application.Volatile

Dim Arr As Variant

nCount = ActiveWorkbook.Names.Count

ReDim Arr(1 To nCount)

For N = 1 To nCount

cPos = InStr(1, ActiveWorkbook.Names(N).RefersTo, “:”)

ePos = InStr(1, ActiveWorkbook.Names(N).RefersTo, “!”)

If cPos < ePos Then

Arr(N) = ActiveWorkbook.Names(N).Name

Else

Arr(N) = “”

End If

Next

DefinedNameArray = Arr

End Function

What the VBA function does is return an array of defined names, but only places the items meeting the correct criteria for a 3D formula in the final array (which is the same concept using in the initial article).

In this case, the InStr function was used to locate the positions of the first colon and exclamation point in the RefersTo string and the values are compared. If cPos<ePos, then the name is added to the array and a null string added otherwise. This array is used in the following formula to find if a 3D defined name is part of the string returned by the FORMULATEXT function. It was defined for use as a CF formatting formula, as shown below (F5 was the active cell when defined).

Is3DDefinedName=MATCH(TRUE,IFERROR(FIND(IFERROR(DefinedNameArray(),””),FORMULATEXT(F5))>1,FALSE),0)

Both F5 and F7 contain formulas using 3D defined ranges.

Peter, thanks for the challenge!

You can download the example file here.

Filed under: Excel, VBA Tagged: 3D, conditional formatting, defined name formula, Excel, VBA ]]>

Originally posted at:

https://www.mrexcel.com/forum/excel-questions/37340-word-scramble.html

this VBA function procedure uses a string as the argument and shuffles that string. Copy/paste this procedure into a module in the VBE.

Function ShuffleString(s As Variant)

On Error Resume Next

Dim CL As New Collection

Application.Volatile

ShuffleString = “”

Do Until CL.Count = Len(s)

R = Int(1 + Rnd * Len(s))

CL.Add R, CStr(R)

Loop

For i = 1 To CL.Count

ShuffleString = ShuffleString & Mid(s, CL(i), 1)

Next

End Function

So, the string in A1 is rearranged with =ShuffleString(A1) entered on the worksheet. For example, the string “evert” is shuffled to “rteve”.

Filed under: Other ]]>

=SUM(Sheet1:Sheet2!B2:B5)

So, I tried to determine what was unique this type of formula string compared to others. What I noticed was that the first colon in this formula always comes before the exclamation point. Thus, I started working on a solution on that basis.

Note, though, that there are ways to write a formula containing a 3D reference that will not meet this criteria, such as:

=SUM(C2:C5,Sheet2!C2:C5)

So, don’t use those kinds of formulas.

To lookup the position of the colon in the formula string, the following formula is needed.

=MATCH(“:”,MID(FORMULATEXT(F6),ROW(INDIRECT(“1:”&LEN(FORMULATEXT(F6)))),1),0)

where F6 contains the formula.

The corresponding formula for looking up the position of the exclamation point is:

=MATCH(“!”,MID(FORMULATEXT(F6),ROW(INDIRECT(“1:”&LEN(FORMULATEXT(F6)))),1),0)

By comparing the two formulas, the following Boolean expression wrapped in an IFERROR function is defined as Is3D:

=IFERROR(MATCH(“:”,MID(FORMULATEXT(F6),ROW(INDIRECT(“1:”&LEN(FORMULATEXT(F6)))),1),0)<=MATCH(“!”,MID(FORMULATEXT(F6),ROW(INDIRECT(“1:”&LEN(FORMULATEXT(F6)))),1),0),FALSE)

Applying this formula as a CF on cell F6, you can see that F6 is highlighted as expected.

You can download the example file here.

Filed under: conditional formatting, Excel Tagged: 3D, conditional formatting, Excel, filter, formulas ]]>

Filed under: Other ]]>

Sub HideDefinedNames()

For Each rname In ActiveWorkbook.Names

rname.Visible = False

Next

End Sub

Filed under: Other ]]>

Filed under: Other ]]>

http://dailydoseofexcel.com/archives/2007/01/12/modifying-shapes-and-charts-with-udfs/

Since this technique has not gained popularity in use, few people know about it. So, I have made an user-friendly model to demonstrate its utility.

The biggest deficiency in working with shape properties is the lack of a good source of lookup information on what the index numbers refer to. I iterated (manually) through all 181 index numbers for shape type (assigned the shapes names based on what I decided, they can be changed is desired), and the table I created can be seen in the ShapeLists worksheet in the example workbook. I defined a list of shape names and used it in a Data Validation List for cell B2. Then, in cell B3, this formula looks up the correct shape index number for the selected shape. That result is used by the ModifyShape UDF in cell G2.

=INDEX(ShapeIndex,MATCH($B$2,ShapeName,0)) ‘in B3

=ModifyShape(1,$B$3) ‘in G2

Here is the ModifyShape VBA function.

Function ModifyShape(ShapeNumber, ShapeType, Optional Vis As Boolean = True)

With ActiveSheet.Shapes(ShapeNumber)

.AutoShapeType = ShapeType

.Visible = Vis

End With

End Function

Note that it has an optional 3^{rd} argument. It is TRUE by default, but if is set to FALSE, the shape is invisible. And, all of this occurs simply by the recalculation of the UDF.

There are a number of shape properties that can be manipuated by an UDF. One fuction that I specifically designed for this article is the ModifyShapeColor function.

Function ModifyShapeColor(ShapeNumber, rColor, gColor, bColor)

With ActiveSheet.Shapes(ShapeNumber)

.Fill.ForeColor.RGB = RGB(rColor, gColor, bColor)

End With

End Function

But, for this example to be fully effective, I needed a reference table of RGB colors that could be utilized by this function. I was able to find such a table at this source:

http://rapidtables.com/web/color/RGB_Color.htm

and I pulled this information into the workbook by using Power Query. Then, I copy/pasted it to the ShapeLists sheet and deleted the query (no need to refresh static information). I defined a list of shape colors and names and used the Shape color name in a Data Validation List for cell C2. Then, in cells C3:C5, these formulas look up the correct RGB numbers for the selected color.

=INDEX(Red,MATCH($C$2,ColorName,0)) ‘in cell C3 etc.

=ModifyShapeColor(1,$C$3,$C$4,$C$5) ‘in cell G3.

You can see the resulting shape and color in the following figure.

Now, realize that the worksheets can have multiple shapes controlled by the UDFs pointing at each shape. This opens up a new way to visualize data. I hope that you can incorporate this technique into your projects.

You can download the workbook here:

Filed under: Other ]]>

=LEFT(FORMULATEXT(A1),1)=”=”

Then, apply a conditional format to A1 as shown below:

Then, you can Copy/Paste Special/Formats to the region containing formulas.

Filed under: Other ]]>

=TEXTJOIN(“”,,CHAR(64+ROW(1:26))) ‘ array-entered

which affords the string

“ABCDEFGHIJKLMNOPQRSTUVWXYZ”

Other character sets strings (such as alphanumeric) can be made in a similar manner.

Filed under: Other ]]>

so I have combined the concepts demonstrated by the following 4 articles located at:

into a single workbook. Among the changes I did/did not make are:

- No change to the formula that given occurance number for records in a filtered list.
- I moved the formula list from above the filtered list to another worksheet.
- I fixed some issues with the VBA code for the Filter Criteria UDF. I then located it with the
- the static list on the other worksheet.
- I included the Advanced Filter search with a custom list with this model.

In moving the static calculated list to another worksheet, I had significant problems adjusting the formulas to work in their new location. For the formula:

=INDIRECT(“Sheet1!a”&SMALL(IF(SUBTOTAL(3,OFFSET(Sheet1!$C$24:$C5023,ROW($C$24:$C5023)-MIN(ROW($C$24:$C5023)),,1)),ROW(1:5000),””),ROW()-2)+26-ROW())

I had to add the sheets names in the parts of the formula that point to the filtered list on Sheet1. Also, to create the correct positioning of the first formula(s) in the list (place on row 3 instead of row 2), I had to change:

ROW()-1)+25-ROW())

to

ROW()-2)+26-ROW())

The FilterCriteriaEnh function was amended to fix several faults – an error handler was added to fix the scenario where .Criteria2 did not exist and adding a line of code (Criteria2=.Criteria2) in case it did (see code in the example workbook).

The criteria UDF was relocated to the row above the static list. The following formula in A1 on the Static worksheet is:

=IFERROR(FilterCriteriaEnh(Sheet1!A23:A5023),””)

Note that the range in the UDF argument points at the filtered list on Sheet1.

The list used for the advanced filter lookup is also located on the Static worksheet. As expected, when I activated the advanced filter the filter criteria UDF did not return a result, since no “filter” was applied to the list.

I hope that I have explained what is available with this new filter model, but if not, please go back and reread the 4 base articles.

You can download the (enhanced) file here.

FilteredResultsTable_AdvancedFilter

Filed under: Excel Tagged: Advanced, Excel, filter, UDF ]]>

I used a reference to Charley Kyd’s use of SUMPRODUCT to filter a list based on a custom list.

http://www.exceluser.com/formulas/search-list-with-sumproduct.htm

In his article, he created a formula used in a helper column to filter based on a custom list of criterias.

I realized that the same type of formula could be used in Excel’s advanced filter. A lot of the utility of using the Excel advanced filter feature is hindered by the fact that an array formula cannot be used as a criteria. However, since the SUMPRODUCT function creates a non-array formula, I surmized that it could be used as a criteria.

BTW, Rob Collie and I published an article on this same subject in PowerPivot a few years ago.

https://powerpivotpro.com/2011/04/calculating-a-sum-based-on-a-list-criteria/

In this scenario, a list containing a column of employee numbers needs to be filtered by a custom subset of those numbers. This could be done by manually selecting those numbers from the filter dropdown criteria, which would take a very long time for a large custom list. The custom list resides on a different worksheet than the list to be filtered (in this case, on the List worksheet defined as EmployeeList).

The criteria formula (in B2) is:

=SUMPRODUCT(NOT(ISERROR(SEARCH(EmployeeList,A5)))+0)>0

Note that this formula “starts” at A5, the first item in the column.

Before applying the filter, the column looks like this:

The advanced filter information is set up as shown below.

Finally, the list after filtering looks like this:

In this example, there is only one column in the list/table. Obviously an employee table would contain many more columns. Also, the employee custom list could potentially could contain 1000’s of employee numbers. I hope that you use this technique useful in your work on employee records.

You can download the example file here.

Filed under: Excel Tagged: Advanced, Excel, filter, formulas ]]>

You can download the file here.

Filed under: Excel, VBA Tagged: Excel, URL, VBA ]]>

https://excelxor.com/2014/08/30/advanced-formula-challenge-2-results-and-discussion/

The methodology for comparing strings as anagrams starts with these formulas, which use B3 and C3 as the locations of the strings.

CodeString1=CODE(MID(UPPER(Sheet1!$B$3),ROW(INDIRECT(“1:”&LEN(Sheet1!$B$3))),1))

CodeString2=CODE(MID(UPPER(Sheet1!$C$3),ROW(INDIRECT(“1:”&LEN(Sheet1!$C$3))),1))

Each of these formulas returns an array of numbers corresponding to the character code of the letters in the string (converted to all UPPER). Why make an array of numbers? So that they can be sorted. So, the next formulas:

CodeStr1Sorted=SMALL(CodeString1,ROW(INDIRECT(“1:”&LEN(B3))))

CodeStr2Sorted=SMALL(CodeString1,ROW(INDIRECT(“1:”&LEN(C3))))

create an array of numbers that are sorted from smallest to largest. So, if both strings contain the same number and frequency of letters, the arrays will be identical. The TEXTJOIN function is used here to create strings from those arrays for comparison.

NumberStr1=TEXTJOIN(“”,,CodeStr1Sorted)

NumberStr2=TEXTJOIN(“”,,CodeStr2Sorted)

The formula indicate that the string in C3 is an anagram of the string in B3 is shown below.

=EXACT(NumberStr1,NumberStr2)

Note that this solution unfortunately does not include an Excel native formula or grouping of formulas to determine whether a string is an actual word (not possible). So, although it is not required, a VBA worksheet function is included here as part of the solution. You can look at the code here. **WordPress.com will not allow me to publish an .xlsm file. So, please add a module in the VBE (Alt-F11) and copy/paste this function procedure into the module. When you save it, you will have to save it as an .xlsm file.**

Public Function IsWord(ByRef Text As String) As Boolean

Dim wd As Object

Application.Volatile True

On Error Resume Next

Set wd = GetObject(, “Word.Application”)

If Err.Number <> 0 Then

Set wd = CreateObject(“Word.Application”)

If Err.Number <> 0 Then

Set wd = GetObject(, “Word.Application”)

End If

End If

IsWord = wd.CheckSpelling(Text)

Set wd = Nothing

End Function

Here is the resulting formula to determine whether both strings are words and anagrams.

=AND(IsWord(B3),IsWord(C3),EXACT(NumberStr1,NumberStr2))

Remember, you need the correct version of Excel 2016 (Office 365) in order to use the TEXTJOIN function.

You can download the file here.

Filed under: Excel Tagged: ANAGRAM, Excel, formulas, TEXTJOIN ]]>

You can download the Excel game here.

Filed under: Excel, VBA Tagged: Excel, formulas, Games, VBA ]]>

Actually, I have already written a blog post about this subject, but I felt that it would be useful to cover this again in an expanded version and provide a workbook to download.

https://dhexcel1.wordpress.com/2014/06/13/using-excel-3d-formulas-on-filtered-lists/

For examples on various types of “multi-worksheet” formulas, see:

https://dhexcel1.wordpress.com/2014/06/09/excel-3d-easy-as-1-2-3-and-a-b-c-and-others/

The figures below shows the results of the 2 types of 3D formulas.

The filter-enabled formula shown below sums the filtered values in the 4 filtered lists. Note that since the SUMPRODUCT function is used here, the result is NOT an array formula.

=SUMPRODUCT(SUBTOTAL(9,INDIRECT(“‘”&CHAR(ROW($97:$100))&”‘!C2:C21”)))

The native Excel method for creating a 3D formula is shown here.

=SUM(A:D!C2:C21)

The result from this formula is a number much higher than the filter 3D formula since there is no way to use the native 3D referencing to construct a filtered result.

Other types of aggregation from the filtered 3D formulas, but they must be constructed as array formulas. The following formulas show the filtered MIN for the desired range and the corresponding Excel-centric 3D formula.

=MIN(SUBTOTAL(5,INDIRECT(“‘”&CHAR(ROW($97:$100))&”‘!C2:C21”))) ‘array formula

=MIN(A:D!C2:C21)

This example shows the formulas for the MAX 3D-filtered and Excel 3D.

=MAX(SUBTOTAL(4,INDIRECT(“‘”&CHAR(ROW($97:$100))&”‘!C2:C21”)) ‘array formula

=MAX(A:D!C2:C21)

There are obviously a number of variations on this theme possible. Knowing that this type of aggregation is available could possibly change the way you analyze your data. HTH!

You can download the file here.

Filed under: Excel Tagged: Excel, filter, formulas, SUBTOTAL ]]>

http://www.oaltd.co.uk/Excel/Default.htm

One of Stephen’s creations was a “simple” VBA function to return the applied criteria of a filtered list to a worksheet cell (shown below).

Function FilterCriteria(Rng As Range) As String

‘By Stephen Bullen

Dim Filter As String

Filter = “”

On Error GoTo Finish

With Rng.Parent.AutoFilter

If Intersect(Rng, .Range) Is Nothing Then GoTo Finish

With .Filters(Rng.Column – .Range.Column + 1)

If Not .On Then GoTo Finish

Filter = .Criteria1

Select Case .Operator

Case xlAnd

Filter = Filter & ” AND ” & .Criteria2

Case xlOr

Filter = Filter & ” OR ” & .Criteria2

End Select

End With

End With

Finish:

FilterCriteria = Filter

End Function

The use of this function is illustrated in the following figure. The formulas are in row 1.

Here is another view with criteria applied to other columns.

It also shows a limitation that this function had. Since the .Criteria1 and Criteria2 properties are strings, when criteria is set for a date column, the string contains Excel’s “date number”, not the date formatted number displayed in the cells. In order to workaround this limitation, I amended the function as shown below.

Function FilterCriteriaEnh(Rng As Range) As String ‘Enhanced to handle date filters

‘By Stephen Bullen and David Hager

Dim Filter As String

Dim Criteria2 As String

Filter = “”

sFormat = Application.Index(Rng, 2).NumberFormat

‘On Error GoTo Finish

With Rng.Parent.AutoFilter

If Intersect(Rng, .Range) Is Nothing Then GoTo Finish

With .Filters(Rng.Column – .Range.Column + 1)

If Not .On Then GoTo Finish

Filter = .Criteria1

If sFormat = “m/d/yyyy” Then

Filter = Left(Filter, InStr(Filter, OnlyDigits(Filter)) – 1) & _

Format(OnlyDigits(Filter), sFormat)

On Error GoTo Finish

Criteria2 = Left(.Criteria2, InStr(.Criteria2, OnlyDigits(.Criteria2)) – 1) & _

Format(OnlyDigits(.Criteria2), sFormat)

End If

Select Case .Operator

Case xlAnd

Filter = Filter & ” AND ” & Criteria2

Case xlOr

Filter = Filter & ” OR ” & Criteria2

End Select

End With

End With

Finish:

FilterCriteriaEnh = Filter

End Function

Function OnlyDigits(s As String) As String

With CreateObject(“vbscript.regexp”)

.Pattern = “\D”

.Global = True

OnlyDigits = .Replace(s, “”)

End With

End Function

First, I needed to capture the format from the column is question to see if it was date formatted.

sFormat = Application.Index(Rng, 2).NumberFormat

If sFormat = “m/d/yyyy” Then

Filter = Left(Filter, InStr(Filter, OnlyDigits(Filter)) – 1) & _

Format(OnlyDigits(Filter), sFormat)

The change in the string for the Filter variable is made by the formula shown above. The OnlyDigits function used in the formula construction is not original, but I do not know the source. It puts the string back together with the date replacing the date system number.

I did the same thing for Criteria2, but it will not exist if a second criteria is not selected in the filter, so I had to add error handling for that scenario.

On Error GoTo Finish

Criteria2 = Left(.Criteria2, InStr(.Criteria2, OnlyDigits(.Criteria2)) – 1) & _

Format(OnlyDigits(.Criteria2), sFormat)

A final filter list example using this enhanced function is shown below.

You can download the file for this here.

Filed under: Excel, VBA Tagged: Excel, filter, UDF, VBA ]]>

https://trumpexcel.com/multiple-lookup-values-single-cell-excel/

In the article, the following statement was made.

“Can we get multiple lookup values for an item in a single cell (separated by comma or space)?

I have been asked this question multiple times by many of my colleagues. And after a lot of head-banging, I realized that it is extremely difficult (if not impossible) to do this using excel functions.”

The problem was solved there with a VBA solution. Well, let’s see if the same scenario can be solved by using only Excel formulas. To be honest, the complete solution I will demonstrate could not be easily accomplished before the introduction of the TEXTJOIN function, which appeared after the article was published.

BTW, the first mention of TEXTJOIN with unique elements can be seen in this video.

If the items in the lookup column are unique, the solution is relatively easy. The formula

=TEXTJOIN(“,”,,IF(arange=E3,brange,””)) where arange is in Column A & brange in Column B

can be array-entered in F3 and filled down (see the following figure).

So, for regions 1-10, the corresponding lookup matches are shown in the delimited strings.

However, for the case where the lookup column contains duplicates, the task to return unique delimited strings for each region is much more difficult. The simplified form of the array to be used in building the final formula is:

cArray=INDEX(brange,N(IF(1,some_array)))

where:

“some_array”=SMALL(IF(arange=$E3,ROW(brange)-1,””), ROW(INDIRECT(“1:”&COUNT(IF(arange=$E3,ROW(brange),””)))))

There are several important parts to the SMALL array (which contains the array positions of the desired items from brange). The main array used as the first argument of the SMALL function is:

IF(arange=$E3,ROW(brange)-1,””)

In my experience, this kind of formula construction is rare, but it works.

The second argument of the SMALL function is:

ROW(INDIRECT(“1:”&COUNT(IF(arange=$E3,ROW(brange),””)))))

The really interesting thing about this formula is that it has to be dynamic with respect to each region since they have differing numbers of lookup values.

Two additional defined name formulas are needed for the final formula construction.

countArray=COUNTA(cArray)

=ROW(INDIRECT(“1:”&countArray))

which creates another dynamic array using the same techique as above.

The final formula is:

=TEXTJOIN(“,”,,IF(MATCH(cArray,cArray,0)=RowArray,cArray,””))

You can see in the figure that none of the strings in column F contain duplicate values. As a comparison, an adjacent column using the TEXTJOIN formula from the first example shows the difference in regions 4 and 9.

Hope that you find this technique useful. You can download the file from the following link.

Filed under: Excel Tagged: Excel, formulas, TEXTJOIN ]]>

Filed under: Excel Tagged: conditional formatting, Excel, formulas ]]>

technology” displayed there. I was reading an article from Oscar’s great Excel site at

and I decided to try and extend his work by creating a sorted unique array derived from a list. I wanted this to use with one of my favorite Excel functions (TEXTJOIN). The final result is shown in the following figure.

Now, to how this was made. The following formula was created by Oscar (and slightly modified by me). Is uses COUNTIF to determine the number of array items that are “greater” than the rest of the items (i.e. A>B).

UniqueArr1=IF(MATCH(COUNTIF(List,”>”&List)+1,COUNTIF(List,”>”&List)+1,0)=ROW(INDIRECT(“1:”&COUNTA(List))),COUNTIF(List,”>”&List)+1,””)

{1;21;26;16;12;””;14;19;7;””;17;25;””;10;3;29;13;””;9;8;6;18;23;24;””;””;””;””;22;””}

Now, the challenge was to create an array of positions from UniqueArr1 corresponding to the largest to smallest numbers in UniqueArr1. If you locate the largest number in UniqueArr1(29), it is in position 16 in the array. Likewise, the 2^{nd} largest number in UniqueArr1(26), is in position 3. This was accomplished by using the following formula (although I admit that it took a while to figure this out).

=MATCH(LARGE(UniqueArr1,ROW(INDIRECT(“1:”&COUNT(UniqueArr1)))),UniqueArr1,0)

It is important to note that the ROW array is dimensioned with COUNT(UniqueArr1), since the elements of UniqueArr1 greater than COUNT are null values. As you can see, the resulting array is correctly dimensioned.

{16;3;12;24;23;29;2;8;22;11;4;7;17;5;14;19;20;9;21;15;1}

Now, we have an array with the sorted positions in the correct order and that array can be used return itemd from the List array. A few years ago, it was thought that the INDEX function could not return an array of items, but then a great solution to this appeared at the excelxor.com site. See:

https://excelxor.com/2014/09/05/index-returning-an-array-of-values/

The resulting formula is shown below.

uSortedArr=INDEX(List,N(IF(1,MATCH(LARGE(UniqueArr1,ROW(INDIRECT(“1:”&COUNT(UniqueArr1)))),UniqueArr1,0))))

The resultant array is:

{“Bovey”;”Bullen”;”Cronquist”;”Dalgleish”;”Devenshire”;”Duggirala”;”Green”;”Hager”;”Hodge”;”Jelen”;”Kusleika”;”Manville”;”McRitchie”;”Mehta”;”Ogilvy”;”Pearson”;”Peltier”;”Pieterse”;”Puls”;”Rech”;”Umlas”}

This array can now be converted back to a string by using the TEXTJOIN function. The use of the delimiter CHAR(10) allows the result to be displayed as shown in the figure earlier if the cell is formatted with word wrap as true and is merged with lower cells. The formula (in cell K1 in the example) is:

=TEXTJOIN(CHAR(10),,uSortedArr)

You can download the file from this link. Remember, you must have a correct version of Excel 2016 for the TEXTJOIN function to work.

Filed under: Excel Tagged: Excel, formulas, TEXTJOIN, Unique ]]>

I started to think about how to return the row number of the last row in a filtered list. I found quite a few examples on the net about how to do this with VBA, but I could not find anywhere someone had accomplished this with an Excel array formula. With a slight modification of the formula in that post, I came up with this.

=MAX(IF(SUBTOTAL(3,OFFSET($C$2:C5001,ROW($C$2:C5001)-MIN(ROW($C$2:C5001)),,1)),ROW(1:5000),0))+1

And, it worked! But, then I realized that this formula had a much greater potential. If the MAX aggregation was replaced by the SMALL function, it could return ALL of the row positions in the filtered list. So, I moved the list down and created my formulas to return all of the filtered records. The result is shown below.

As you can see, all of the filtered records in the top list created by formulas are identical to those in the filtered list. The key formula in cell A2 is:

=INDIRECT(“a”&SMALL(IF(SUBTOTAL(3,OFFSET($C$24:C5023,ROW($C$24:C5023)-MIN(ROW($C$24:C5023)),,1)),ROW(1:5000),””),ROW()-1)+25-ROW())

If “a” is substituted by “b”, “c”, “d” and “e” in the same formula filled to B2:E2, those five formulas can then be filled down to create the formula list. I have been working with filtered lists for a long time, and I always used a VBA procedure to copy/paste that information to another location. Now, this “static” list makes it very easy to use filtered results. I hope that you find this technique useful in your work.

The workbook can be downloaded here.

Filed under: Other ]]>

The array formula in the Occurrence# column is:

=SUM(N(IF(SUBTOTAL(3,OFFSET($C$2:C2,ROW($C$2:C2)-MIN(ROW($C$2:C2)),,1)),$C$2:C2,””)=C2))

Without going into a lot of detail on how this formula works, based on the selected Composition Number in column C, is uses an auto-expanding range that only produces a value of 1 if the rows are visible and then sums those instances. In this example, selecting only the compositional number 1127 produces the filtered table shown in the figure.

In the Process column, if A and B are removed through filtering, the result is:

Finally, if Approved is removed the Status column through filtering, the result is:

It is important to note that this formula is quite calculation-intensive. There are 5000 records in the example workbook, and it takes several seconds to recalculate after each filter change.

You can download the workbook here.

Filed under: Excel Tagged: Excel, filter, formulas ]]>

Using Excel UDF to Translate a Phrase From One Language to Another by David Hager

https://dhexcel1.wordpress.com/2017/06/03/creating-an-excel-translator-by-david-hager/

Using #Excel to Make A Round Robin Tournament Schedule by David Hager

#Excel Short and Sweet Tip #19 (Invaluable Excel Speller) by David Hager

#Excel Short and Sweet Tip #18 (Toggle Formatting on Worksheet) by David Hager

#Excel: Project Tracking Workbook by David Hager

https://dhexcel1.wordpress.com/2017/05/25/excel-project-tracking-workbook-by-david-hager/

#Excel Short & Sweet Tip #16 (Multiple Delimiters with TEXTJOIN for Custom Formatting) by David Hager

#Excel Native 3D Ranges with the TEXTJOIN Function Plus Bonus by David Hager

#Excel UDF Using Google API to Return the Elevation of an Address by David Hager

#Excel: Creating a List of Option Expiration Dates and Triple Witching Dates with Excel Formulas by David Hagerthat can be downloaded.

Copy #Excel Chart as a Enhanced Metafile Picture by David Hager

#Excel: Removing Outliers with Excel Formulas to Modify Control Limits by David Hager

#Excel: Origin of Sparklines – LineChart VBA User-Defined Function by David Hager

#Excel: Finding and Visualizing the Last Record in a Table Based on Criteria by David Hager

#Excel Short and Sweet Tip #12 (Documenting Formulas and Highlighting Those Formulas With Conditional Formatting) by David Hager

#Excel: Creating a Environmental Variables Table with the VBA ENVIRON Function UDF by David Hager

#Excel Gems: A Valuable Collection of Excel and Power BI Links to Great Excel and Modern Excel Techniques by David Hager

#Excel: Building a Frequency Summary Table Based on an Excel List by David Hager

#Excel: A Model Using the CONVERT Function Containing Categories by David Hager

#Excel Magic Consolidator by David Hager

https://dhexcel1.wordpress.com/2017/05/07/excel-magic-consolidator-by-david-hager/

#Excel: Using Conditional Formatting to Highlight Cells That Contain Array Formulas Using the FORMULATEXT Function by David Hager

#Excel: Generating a Random Sampling From a List Using VBA and the TEXTJOIN Function by David Hager

#Excel Worksheet UDF that Adds a Comment to Any Cell by David Hager

#Excel: Using Conditional Formatting to Highlight 3D Formulas with Defined Names by David Hager

#Excel: Using Conditional Formatting to Highlight Cells Containing Native 3D Formulas by David Hager

#Excel: Using Conditional Formatting to Highlight Cells Containing User-Defined Functions by David Hager

#Excel: Modifying Shapes From An UDF in a Worksheet Cell by David Hager

#Excel: Combining and Refining a Static Filter List & Filter Criteria UDF by David Hager

#Excel: Using Advanced Filter with a Custom List By David Hager

#Excel VBA: Create a Table of File Locations and URLs for Your Favorites by David Hager

#Excel Identifying if a String is the Anagram of Another String Using the TEXTJOIN Function by David Hager

Mine3D for #Excel: An Excel-based Game by David Hager

https://dhexcel1.wordpress.com/2017/04/08/mine3d-for-excel-an-excel-based-game-by-david-hager/

Using the SUBTOTAL Function in #Excel To Aggregate Values From Multiple Filtered Lists by David Hager

Using #Excel VBA to Create a Filter Criteria Worksheet Function by David Hager

Multiple Lookup Values in a Single Cell (With/Without Duplicates) Using Only #Excel Formulas by David Hager

#Excel Shift Calendar by David Hager

https://dhexcel1.wordpress.com/2017/04/03/excel-shift-calendar-by-david-hager/

Generating a Sorted Unique Array in #Excel using Only Formulas by David Hager

#Excel: Creating A List Made Up Of Formulas From A Filtered List by David Hager

#Excel Filtered List Using a Calculated Column to Count Occurrence Number by David Hager

Using the #Excel Advanced Filter to a List Having Internal Numbers in a String By David Hager

Using Conditional Formatting to Highlight Unique Items in an Excel Filtered List By David Hager

Chapter on Conditional Formatting in Excel by David Hager (a Blast from the Past)

Using the CHOOSE and AGGREGATE Functions To Apply Conditional Formatting to a Filtered List in Excel By David Hager

Creating a Unique Delimited String from an Excel Filtered List by Using the TEXTJOIN Function By David Hager

Archive of Excel Experts E-Letter (by David Hager)

https://dhexcel1.wordpress.com/2017/01/07/archive-of-excel-experts-e-letter-by-david-hager/

Creating an Excel Table of Components By Product From a List Using the TEXTJOIN Function By David Hager

Using the Excel TEXTJOIN Function To Return Unique Items In A One-Cell Delimited String From A 2D and 3D Range By David Hager

xlCube: An Excel game

https://dhexcel1.wordpress.com/2016/11/29/xlcube-an-excel-game/

Power BI Help for Excel

https://dhexcel1.wordpress.com/2015/08/31/power-bi-help-for-excel/

BINGO! Excel Power Formula

https://dhexcel1.wordpress.com/2015/03/31/bingo/

Filed under: Excel Tagged: download ]]>

http://www.tushar-mehta.com/publish_train/data_analysis/06.shtml

http://www.contextures.com/xladvfilter02.html

http://www.exceluser.com/formulas/search-list-with-sumproduct.htm

Update:

There is another reference I wanted to include in the post, but just found. It is:

http://www.get-digital-help.com/2016/12/20/filter-rows-where-a-cell-contains-a-numeric-value/

I could not find an example in my Internet search of a way to filter based on strings with internal numbers in a column list. So, I decided to fill that void. There can be multiple criteria in an advanced filter, in this case only is needed. Given that A5 is the first item in the list, the following formula can be used.

=OR(NOT(ISERROR(FIND({0,1,2,3,4,5,6,7,8,9},A5))))

The figure below shows how the advanced filter was set up.

This is based on the assumption that all of the strings in the list would contain internal numeric strings or nothing at all. The result is:

If necessary, the following formula will filter all strings containing no numbers and those where the first or last character are numbers.

=AND(NOT(ISNUMBER(VALUE(LEFT(A5,1)))),NOT(ISNUMBER(VALUE(RIGHT(A5,1)))),OR(NOT(ISERROR(FIND({0,1,2,3,4,5,6,7,8,9},A5)))))

The result is:

Since this example assumes only 1 internal string of numbers in each string, it cannot handle (filter out) a case such as ae326tw207def. Perhaps I will tackle that scenario in a future post. Enjoy!

You can download the file here.

Filed under: Excel Tagged: Advanced Filter, Excel, formulas ]]>

Quite a while back I created a formula to count the number of unique items in a filtered list. For examples, see:

http://blog.contextures.com/archives/2010/10/04/count-unique-items-in-excel-filtered-list/

__and__

I decided to extend this methodology to the conditional formatting of a filtered list. The following defined name formulas are required.

Rge=$A$5:$A$29

unRge=IF(SUBTOTAL(3,OFFSET(Rge,ROW(Rge)-MIN(ROW(Rge)),,1)),Rge,””)

cfUnRge=INDEX((N(IF(ISNA(MATCH(“”,unRge,0)),MATCH(Rge,Rge,0),IF(MATCH(unRge,unRge,0)=MATCH(“”,unRge,0),0,MATCH(unRge,unRge,0)))=ROW(Rge)-MIN(ROW(Rge))+1)),ROW()-4)

(The cursor must be on A5 when the cf function is defined and applied to A5:A29)

So, before filtering, the list shows the 1^{st }unique items highlighted in yellow.

After filtering (removing the letters b,e,f,g), the resulting filtered list looks like this.

I hope that this is another useful tool to add to your Excel bag of tricks. You can download the file from the link below. Enjoy!

Filed under: conditional formatting, Excel Tagged: conditional formatting, Excel, filter, formulas, Unique ]]>

https://dhexcel1.wordpress.com/2017/01/07/archive-of-excel-experts-e-letter-by-david-hager/

This article was perhaps one of my best works in Excel. So, although it was written long ago, it still contains valuable information that I am sharing here. The following file links are the working Excel file and the article document. Enjoy!

Filed under: conditional formatting, Excel Tagged: conditional formatting, Excel ]]>

“#Excel 2013 did you know” that there are download files in Help for new worksheet functions.

“#Excel, did you know?” that chart based on TABLE will auto-expand when new data is added.

“#Excel, did you know” that you drag/drop data from one #Excel window to another?

“#Excel did you know?” you can use a defined name range on an xl4 macro sheet in a formula?

“#Excel did you know?” that you can compare two columns by using GoTo Special – Row Differences?

“#Excel did you know?” that if a number of worksheets are selected, right-clicking one will make it the active sheet.

“#Excel, did you know?” magic UDF part 2: .AddComment .Comment.Text CStr(Now()) End With End Function

“#Excel, did you know?” magic UDF part 1: Function TS() Application.Volatile True On Error Resume Next TS = “TS” With Application.Caller

“#Excel, did you know?” you can make and store your own custom cell styles.

“#Excel, did you know?” if you fill a table across worksheets, new tables are made automatically in the destination worksheets.

“#Excel, did you know?” you can import XML from Internet which becomes a data table that you can then load into PowerPivot.

“#Excel, did you know?” that you can use Insert, Object to place a linked Excel file inside itself.

“#Excel, did you know?” there are >250 commands that are not accessible through the ribbon, but can be added to the Quick Access Toolbar.

“#Excel, did you know?” you can r-cl the cell below a text list & select “Pick from drop-down list” to pick an entry in the list.

“#Excel, did you know?” you can right-click the scroll buttons in lower left corner to access a list of all worksheets in workbook.

“#Excel, did you know?” you can create a defined name formula (DNF) from an UDF without arguments.The DNF can then be used in other formulas.

“#Excel, did you know?” you can write an external link formula in a cell that points to a cell in an #Excel file stored on the Internet.

“#Excel, did you know?” you can return the sum of top 3 values of a filtered column with =SUM(AGGREGATE(14,1,filtered_col,ROW(1:3))) CSE

“#Excel, did you know?” r-cl a shape, cl 1st option & enter VBA procname in Address box preceded by #. cl on shape to go to that proc in VBE.

“#Excel, did you know?” you can link a data range in an external workbook to a sparkline.

“#Excel, did you know?” you can link a cell in an external workbook to a shape.

“#Excel, did you know?” Convert formulas to values: Select range, right-click edge, pull away, drop in original area and select menu item.

“#Excel, did you know?” that sparklines can use defined name formulas such as =OFFSET($A$1,1,$G$1,COUNTA($A:$A)-1,1) as their input range.

“#Excel, did you know?” that sparklines autoadjust with auto-expansion of tables if associated with a vertical range.

“#Excel, did you know?” that sparklines respond to filters in tables if associated with a vertical range.

Filed under: Other ]]>

https://powerpivotpro.com/2012/11/david-hager-on-dynamic-conditional-formatting/

So, I decided to incorporate the use of the CHOOSE function into my original article and give it a friendly user interface. The two user inputs were both created using Data Validation with the List option. They are defined as shown below and pictured in the following figure (showing unfiltered list).

TopN=Sheet1!$B$1

Crit=Sheet1!$B$2

These inputs are used to return values needed by the CF conditions. TopN is selected by the user in cell B1. Cell B2 gives a choice of Large or Small. The following formula converts this information into a number to be used by the CHOOSE function.

CritNumber=IF(Crit=”Large”,1,2)

The CF conditions are made to be applied to column B. When each formula is defined, the active cell needs to be B6.

LargeCondition=OR(Sheet1!B6>=AGGREGATE(14,1,Sheet1!$B$6:$B$31,ROW(INDIRECT(“$1:$”&TopN))))

SmallCondition=OR(Sheet1!B6<=AGGREGATE(15,1,Sheet1!$B$6:$B$31,ROW(INDIRECT(“$1:$”&TopN))))

When combined with the CHOOSE function (the formula used for the CF), they provide a methodology to highlight filtered rows, as shown below (filter set to display values of 50 to 175 in column B).

=CHOOSE(CritNumber,LargeCondition,SmallCondition)

If a way to visualize TopN and BottomN simultaneously was required, a second CF condition can be appled to column B.

=CHOOSE(CritNumber, SmallCondition, LargeCondition)

The following figure shows the result.

This is just a demonstration of the versatility of using CF condtions in filtered lists. The application of this method to many columns can be done, as well as the use of different CF conditions. I might write another article about this subject later, but for now, enjoy! Click the link below to download the working file.

Filed under: Excel, filtering Tagged: conditional formatting, Excel, filter ]]>

In my previous blog post,

I demonstrated a way to efficiently extract an internal number from a string. However I thought I would try to extend this by doing the same thing to a range of strings that contain internal numbers. Using the CONCAT function I was able to combined strings from cells in a specified range.

rng=Sheet1!$A$2:$A$5 (strings as shown below).

amx2063jawe

amx203jawe

amx205631jawe

amx20563jawe

cStr=CONCAT(rng)

Note that the strings are of different length as are the internal strings of the numbers. Using a methodology to convert strings from individual cells did not help me to be able to solve the problem. So the next step in processing the long string was to convert it to an array. But what was required was a way to construct an array that contained the internal numeric strings but no non-numeric array items. The effort to solve this problem involved several dead ends and several days of work. Finally, I decided that the non-numeric items needed to be converted to commas so that the array could be converted to a comma delimited string. This was accomplished as shown below.

commaArray=IF(ISNUMBER(VALUE(MID(cStr,ROW(INDIRECT(“1:”&LEN(cStr))),1))),MID(cStr,ROW(INDIRECT(“1:”&LEN(cStr))),1),”,”)

which affords:

{“,”;”,”;”,”;”2″;”0″;”6″;”3″;”,”;”,”;”,”;”,”;”,”;”,”;”,”;”2″;

“0”;”3″;”,”;”,”;”,”;”,”;”,”;”,”;”,”;”2″;”0″;”5″;”6″;”3″;”1″;”,

“;”,”;”,”;”,”;”,”;”,”;”,”;”2″;”0″;”5″;”6″;”3″;”,”;”,”;”,”;”,”}

The use of the TEXTJOIN function was able to accomplish this as well as putting the numeric items back together as originally found in the internal strings.

commaStr=TEXTJOIN(“”,TRUE,commaArray)

affords the string

,,,2063,,,,,,,203,,,,,,,205631,,,,,,,20563,,,,

If you have read this blog post:

as originally created at:

http://www.excelfox.com/forum/showthread.php/333-Get-Field-from-Delimited-Text-String

You should remember that the following formula will convert a comma delimited string back to an array. But, I was not sure if a delimited string with so many blank fields would convert correctly, but it did!

tArray=VALUE(TRIM(MID(SUBSTITUTE(commaStr,”,”,REPT(” “,999)), ROW(INDIRECT(“1:”&LEN(commaStr)-LEN(SUBSTITUTE(commaStr,”,”,””))+1))*999-998,999)))

giving:

{“,”;”,”;”,”;”2063;”,”;”,”;”,”;”,”;”,”;”,”;”,”;203;”,”;”,”;”,”;”,”;”,”;”,”;”,”;205631;”,”;”

,”;”,”;”,”;”,”;”,”;”,”;20563;”,”;”,”;”,”;”,”}

The final step is an array formula that creates the array that can be operated on by the AVERAGE function. Of course, any aggregation can be used as desired.

=AVERAGE(IF(ISERROR(tArray),””,tArray))

Remember that you have to have the Excel 2016 version included in Office 365 in order for the TEXTJOIN and CONCAT functions to work.

Filed under: Other ]]>

Here is the comment:

… the following array formula will return a numeric string from a string (i.e. – 125 from AMDHF125KOI) by using this formula. =TEXTJOIN(“”,TRUE,IFERROR(VALUE(MID(A1,ROW(INDIRECT(“1:”&LEN(A1))),1)),””))

Chris confirmed that it worked!

Afterwards, I forgot about it, until I read the article on XOR LX’s web site about extracting numbers from a string.

https://excelxor.com/category/extracting-numbers-from-a-string/

In looking at the comparisons, I saw that this TEXTJOIN formula construction simplified the extraction of an internal numeric string from a string as compared to previous solutions.

I am looking at ways to extend this methodology to other string-to array-to string solutions.

Filed under: Other ]]>

An Excel formula that correctly handles all of these requirements is needed. If 2 of the measurements are within statistical variation, they are averaged. This would be the two closest values.

But if two measurements are equidistant from the 3^{rd}, (13.2,13.5,13.8) then all 3 values

must be averaged.

So, given those requirements, the following formula will return the correct result.

=IF(SUM(MATCH($A$1:$C$1,$A$1:$C$1,0))<6,QUARTILE($A$1:$C$1,1+2*(MEDIAN($A$1:$C$1)>SUM($A$1:$C$1)/3)),AVERAGE(IF(LARGE(ROUND(ABS($A$1:$C$1-TRANSPOSE($A$1:$C$1)),3),5)=ROUND(ABS($A$1:$C$1-TRANSPOSE($A$1:$C$1)),3),$A$1:$C$1,””)))

First, if the 3 values are all different, then

=SUM(MATCH($A$1:$C$1,$A$1:$C$1,0))=6 is True.

So, if SUM(MATCH($A$1:$C$1,$A$1:$C$1,0))<6,then the formula uses

=QUARTILE($A$1:$C$1,1+2*(MEDIAN($A$1:$C$1)>SUM($A$1:$C$1)/3))

In the comments at this site:

http://chandoo.org/wp/2011/01/19/average-of-closest-2-numbers/

a poster in the comments named Ihm came up with this formula.

In the FALSE condition of the formula is the following:

=AVERAGE(IF(LARGE(ROUND(ABS($A$1:$C$1-TRANSPOSE($A$1:$C$1)),3),5)=ROUND(ABS($A$1:$C$1-TRANSPOSE($A$1:$C$1)),3),$A$1:$C$1,””))

It is based on a 3×3 matrix obtained from

=ROUND(ABS($A$1:$C$1-TRANSPOSE($A$1:$C$1)),3)

For a data set of

13.4 | 13.55 | 13.8 |

The following matrix is

{0,0.25,0.4;0.25,0,0.15;0.4,0.15,0}

The ROUND function is necessary since the ABS function sometimes introduces differences (i.e. – 0.25 vs 0.2499999999).

The 5^{th} largest value in the matrix corresponds to the smallest difference. The values for those differences in A1:C1 are averaged to afford the desired result.

Filed under: Other ]]>

Notice what the columns look like where no information has been added at the data source. The column containing the dates return at the bottom 01/00/1900, which is 0 with a date format. The column containing the data return at the bottom 0’s. An attempt to chart this data as is shown in the following Figure. = SERIES(Control!$V$1,Control!$U$2:$U$39,Control!$V$2:$V$39,1)

Clearly, the chart does not produce the desired effect. A method of charting just the “good” data is needed. In order to identify the end of the good data, this defined name formula looks at column V and finds the 1^{st} position of a 0.

EndOfData= MATCH(0,Control!$V:$V,0)-2

Actually, the formula for doing that would exclude the -2, but it is needed for sizing the subsequent OFFSET formulas.

DateRange= OFFSET(Control!$U:$U,1,,EndOfData,)

Data Range= OFFSET(Control!$V:$V,1,,EndOfData,)

So, the defined names formulas can now be used in the chart series formula.

=SERIES(Control!$V$1,ChartDraw.xlsm!DateRange,ChartDraw.xlsm!DataRange,1)

Note that the defined names are at the workbook level. The desired chart is shown below.

Hope this helps!

Filed under: Other ]]>

https://dhexcel1.wordpress.com/2017/01/07/archive-of-excel-experts-e-letter-by-david-hager/

The following defined names are needed to construct the formula.

Rge=Sheet1!$A$2:$A$20

unRge=IF(SUBTOTAL(3,OFFSET(Rge,ROW(Rge)-MIN(ROW(Rge)),,1)),Rge,””)

unRge returns an array that contains only filtered items.

In the figure, rows 2,3,4,6,8,10,11,12,15,17,18,19,and 20 are visible. To return a unique delimited string for only those visible rows, use the following formula (in E3):

=TEXTJOIN(“,”,TRUE,IF(N(IF(ISNA(MATCH(“”,unRge,0)),MATCH(Rge,Rge,0),IF(MATCH(unRge,unRge,0)=MATCH(“”,unRge,0),0,MATCH(unRge,unRge,0)))=ROW(Rge)-MIN(ROW(Rge))+1),unRge,””))

which affords

a,c,h,l,v,m,d,w,g,o,t

You can download the file here.

Filed under: Excel, filtering Tagged: Excel, filter, TEXTJOIN, Unique ]]>

Here is the link.

Filed under: Excel, VBA Tagged: ARCHIVE, Excel, VBA ]]>

arange=Sheet1!$A$2:$A$25

brange=Sheet1!$A$2:$A$25

The following formula was used to make the unique list of compounds in column E.

=INDEX(arange,MATCH(0,INDEX(COUNTIF($E$2:E2,arange),0,0),0)) in E3.

Then the formula is copied down until #N/A appears in a cell. Cells containing #N/A are then deleted.

I found this formula at Oscar’s great Excel site. See:

Now that the unique list is in place, a comma delimited list of components can be created in column F.

Place the following formula in cell F3 and fill down.

=TEXTJOIN(“,”,,IF(arange=E3,brange,””))

This array formula compares the value in E3 to each value in arrange and if there is a match, the corresponding value in brange is returned to the array. The TEXTJOIN function converts the array to a string using comma as the delimiter.

You can download the file here.

Filed under: Excel Tagged: Excel, formulas, TEXTJOIN ]]>

You know, It’s amazing what you can learn when you reread something you previously had written :). I was thinking of how to convert a delimited string into an array, and, lo and behold, I had already done this as part of that article. Here is that formula shown below:

DelStrArry=TRIM(MID(SUBSTITUTE(Sheet1!$A$1,”,”,REPT(“”,999)),ROW(INDIRECT(“1:”&LEN(Sheet1!$A$1)-LEN(SUBSTITUTE(Sheet1!$A$1,”,”,””))+1))*999-998,999))

Armed with this formula (which creates an array) that can be used as the main argument in the TEXJOIN formula demonstrated in my previous blog post, I was ready to complete the desired formula. See:

It was also necessary to correctly scale the row array the same size as the primary array. This was accomplished with the following defined name formulas.

CntDelStrArry=COUNTA(DelStrArry)

RowArry=ROW(INDIRECT(“1:”&CntDelStrArry))

The final result is:

=TEXTJOIN(“,”,,IF(MATCH(DelStrArry,DelStrArry,0)=RowArry,DelStrArry,””))

which will convert a delimited string like, for example

a,b,c,c,d,a,e,r,h,h,t,o,x,a,b,c (in A1)

to

a,b,c,d,e,r,h,t,o,x

Filed under: Excel, TEXTJOIN Tagged: formulas ]]>

https://www.youtube.com/watch?v=QJ2O07EB80Q&feature=youtu.be

The methodology for making a 1D array from a 2D Excel range was created and described in great detail at:

https://excelxor.com/2014/11/08/unique-alphabetical-list-from-several-columns/

It was subsequently used to make a unique list from that range. The following formula uses a slightly modified version of that methodology.

=TEXTJOIN(“,”,,IF(MATCH(Arry4,Arry4,0)=Arry1,Arry4,””))

where the required defined named formulas are:

Range1 =Sheet1!$H$2:$L4)

Arry1=ROW(INDIRECT(“1:”&COLUMNS(Range1)*ROWS(Range1)))

Arry2=1+INT((Arry1-1)/COLUMNS(Range1))

Arry3=1+MOD(Arry1-1,COLUMNS(Range1))

Arry4=INDEX(Range1,N(IF(1,Arry2)),N(IF(1,Arry3)))

Again, these formulas were not created by me, but the TEXTJOIN shown above does create a one-cell comma-delimited string from the 2D range Sheet1:!$H$2:$L4).

For a VBA solution to this same problem, see:

I needed a way to transform a 3D range in Excel to a 2D array. Luckily, this had already been done recently. Here is the formula:

Range_3D=CELL(“contents”,IF(1,+INDIRECT(Sheets&TEXT(MODE.MULT(ROW(Range1)*10^5+COLUMN(Range1),ROW(Range1)*10^5+COLUMN(Range1)),”!R0C00000″),)))

This formula was created by MichaelCH as part of the collaboration at the amazing excelxor.com site.

Since this formula creates a 2D array from a 3D array, I was hopeful that it could be used in the same way that a “real” Excel 2D range is transformed to a 1D array. In particular, I was concerned that the COLUMNS function would not work on a 2D array, but it did! I just had never tried it before.

In order to modify Arry1 for correct scaling for the 3D range, the following defined formulas were needed:

Sheets={“Sheet1″,”Sheet2″,”Sheet3”,”Sheet4”} ‘in this example

ShCnt=COUNTA(Sheets)

The modification of Arry1 to 3D scaling is shown below:

Arry1_3D=ROW(INDIRECT(“1:”&COLUMNS(Range1)*ROWS(Range1)*ShCnt))

along with the other transform array formulas.

Arry2_3D=1+INT((Arry1_3D-1)/COLUMNS(Range_3D))

Arry3_3D=1+MOD(Arry1_3D-1,COLUMNS(Range_3D))

Arry4_3D=INDEX(Range_3D,N(IF(1,Arry2_3D)),N(IF(1,Arry3_3D)))

The resulting formula using TEXTJOIN affords the desired one cell delimited string on unique items from a 3D range.

=TEXTJOIN(“,”,,IF(MATCH(Arry4_3D,Arry4_3D,0)=Arry1_3D,Arry4_3D,””))

Apart from using the created array with TEXJOIN, the transforming of a 3D range in Excel to a 1D array is also noteworthy.

Here is the link to download the file. Remember though, that you have to have the Excel version in Office 365 in order for the TEXTJOIN formulas to work.

Filed under: Excel Tagged: 3D, Excel, TEXTJOIN, Unique ]]>

I invented this Excel game back in the 1990’s and this is the 4th iteration, made in 1999.

It has a lot of neat techniques in it, feel free to examine it. It requires a lot of practice to play this game effectively. It is like a 3D version of Battleship. I did not erase the scores from the previous times this game was played, but you can.

Enjoy!

Filed under: Excel, VBA Tagged: Excel, formulas, Games, VBA ]]>

by David Hager

Power Pivot and Power Query add-ins for Excel have revolutionized the way business intelligence can be done. Further, Microsoft has put a lot of effort into providing extensive online documentation for both of these BI tools. However, there is no direct connection between the add-ins and the online help files. There is a help icon on the Power Query ribbon but in my experience the link is always broken. Wouldn’t it be great if you could access Microsoft’s online documentation for Power Pivot and Power Query directly from within Excel?

The Solution!

Available here is the Power BI Help for Excel file. When you open it in Excel, the custom ribbon displays two buttons: one for DAX functions help and one for Power Query functions help. An userform is displayed which allows you to select the desired function category from a list. This action populates the functions in that category in another list. When one of the functions is selected, the desired Microsoft help documentation for that function is shown. Then, you can either read or print the web page. Please note that the help information available to be viewed is current to the creation date of this file. Any deletions/additions by Microsoft of these functions will not be automatically updated for this file. Further, any changes to the URLs to this online information by Microsoft will break the application. I hope that this will be beneficial to you in your Power BI learning curve.

IMPORTANT NOTE: DO NOT TRY TO OPEN FROM THE LINK BELOW. Instead, save it to your computer. Then, in Windows Explorer, change the file extension from .xlsx to .xls. After this action, you can open it normally in Excel.

Filed under: Excel, VBA Tagged: Excel, Power BI, VBA ]]>

Distance = ACOS(SIN(Distance[Latitude_1]*[PI_DIV180])*SIN(Distance[Latitude_2]*[PI_DIV180])+COS(Distance[Latitude_1]*[PI_DIV180])*COS(Distance[Latitude_2]*[PI_DIV180])*COS((Distance[Longitude_2]*[PI_DIV180])-(Distance[Longitude_1]*[PI_DIV180])))*3959

Hope that you find this useful!

Filed under: Excel, Power BI, PowerPivot DAX Tagged: DAX, Excel, Power BI, PowerPivot ]]>

**and **

**http://www.powerpivotpro.com/2014/01/containsx-revisited-what-was-the-match/**

**I decided that it was time to extend this solution to search at the end of a string. In particular, I started to look at my bank statements and I had a need to filter all payments that were a fixed monthly payment. So, Rob’s formula shown below worked great for this:**

= SUMX (MList,FIND (MList[MonthlyPay],Payments[Type],, 0 ) )> 0

**where MList is a linked list [MonthlyPay] of the search strings those fixed payments, and Payments[Type] is a column in the table for my bank statement. I was able to use this Boolean result to filter my pivot table to afford the desired result.**

**The payment descriptions are space delimited, and I also wanted to return all searches that look at only the last string in the space delimited string. The following formula accomplishes this.**

** **= SUMX( MList, FIND( MList[MonthlyPay], MID( [Type], FIND( “~”, IFERROR( SUBSTITUTE( Payments[Type], “”, “~”, LEN(Payments[Type]) -LEN(SUBSTITUTE(Payments[Type],””,””)) ), “~” ), , 1 ), 255 ), , 0 ) ) >0

**The internal SUBSTITUTE function creates a string with only the last space in the original string replaced with a “~”, the position which can then be located by the FIND function.**

**In cases where it may be necessary to search the end of a string that uses another delimiter, it may be desirable to automatically change the delimiter in this formula. By using a one cell linked table, the value in ****Delimiter[delim] can be changed in the table and then updated in the DataModel. The result is shown in the formula below.**

= SUMX( MList, FIND( MList[MonthlyPay], MID( [Type], FIND( “~”, IFERROR( SUBSTITUTE( Payments[Type], VALUES(Delimiter[delim]), “~”, LEN(Payments[Type]) -LEN( SUBSTITUTE( Payments[Type], VALUES(Delimiter[delim]), “” ) ) ), “~” ), , 1 ), 255 ), , 0 ) ) >0

**Although I cannot claim to know every DAX formula ever made, I am fairly certain that this represents the 1 ^{st} example of parameterizing a text character in a DAX formula.**

**BTW, I apologize for the brevity of this article and the lack of any pictures showing visually what I am describing. **

**It is possible that I drifted off of the subject of an actual ENDSWITHX function equivalent, so to correct that, I offer the following formula.**

= SUMX( MList, FIND( MList[MonthlyPay], RIGHT([Type],MAX(MList[LenVal])), , 0 ) ) >0

**where a column in the MList table [LenVal] uses the formula =LEN([MonthlyPay]) to calculate the number of text characters for each search string. The maximum value is used with the RIGHT to return a searchable string from the end of the [TYPE] string. If the [type] string has is smaller than the max len value of the search string, it returns the shorter string without producing an error.**

**HTH!**

Filed under: Excel, PowerPivot DAX Tagged: Data Model, DAX, Excel, PowerPivot ]]>

I made a Bingo card that uses only formulas. That is, using worksheet formulas that return random numbers without repetition. People have been trying to

do this for a long time, and I believe that this is the first such example.

Download at:

Enjoy!

Filed under: Excel Tagged: Excel formulas ]]>

The best Excel formula site is:

The best Excel blog site is:

The best “heritage” Excel site is:

http://www.cpearson.com/Excel/MainPage.aspx

The best Excel PowerPivot site is:

The best Excel PowerPivot DAX site is:

The best Excel training site is:

The best Excel charting site is:

The best Excel Power Query site is:

https://cwebbbi.wordpress.com/

Filed under: Excel ]]>

http://www.indeed.com/jobtrends?q=Excel+VBA+powerpivot&l=&relative=1

In essence, what this is saying is that the job market for “Excel developers” with PowerPivot experience is basically zero.

So, if you are an up-and-coming Excel guru in your company, concentrate on learning Microsoft SQL Server tools and Power BI, rather than extending your Excel skills.

Filed under: Other ]]>

Filed under: Other ]]>

Among my life-long hobbies is my favorite: Track and Field. I was never a participant, but I have followed the sport closely for over 40 years. I have served as a coach, an official, an announcer and as a statistician as well as a fan. As an observer, I had noted that number of performances in a number of events seemed to have dropped off in quality over the last 15-20 years. In particular, the great matches between Kirani James and LaShawn Merritt this year over 400 meters seemed to me to be reversing the trend I had observed. Well, it was time to put my Excel PowerPivot skills to work to see whether my observation was just my imagination. First, I located a source of data on the Internet for al-time 400 meter times.

http://www.alltime-athletics.com/m_400ok.htm

This source is a record of all 400 meter race results with times less than 45.20 and updated regularly, ideal for my purpose. Unfortunately, Power Query does not recognize there is data on the web page. Excel’s heritage web query does recognize the data field, but I decided to not use it, mainly because the data does not have any headers. Instead, I simply highlighted the data and copy/pasted it into Excel (and added headers).

This list contains ALL performances, meaning that in a given year if someone ran ten 400 meters races all under 45.20, all of those results are in the list. That information will be quite useful to me for future analyses, but what I really need was a list that had the best time for each athlete per year. So, I pulled the data into PowerPivot and created several calculated columns.

The DAX formula in the primary calculated column (named UniqueMinTime) returns the fastest time for each runner per year (or 10000, if not the fastest time). This formula is shown below:

=IF(

Main[Time]=

CALCULATE(MIN(Main[Time]),FILTER(Main,Main[YEAR]=EARLIER(Main[YEAR])&&Main[Name]=EARLIER(Main[Name])))

,CALCULATE(MIN(Main[Time]),FILTER(Main,Main[YEAR]=EARLIER(Main[YEAR])&&Main[Name]=EARLIER(Main[Name])))

,10000)

Note that this formula uses the EARLIER function. For large datasets, this would create performance problems, but it works fine for datasets with less than 10000 rows.

Now, a measure was created to harvest the values in the calculated column to find the Nth best performance (in this case, 4th best) for unique individuals.

FullNthPerformance:=IF(

OR(COUNTROWS(TOPN(4,Main,Main[UniqueMinTime],1))<4

,MINX(TOPN(1,TOPN(4,Main,Main[UniqueMinTime],1),Main[UniqueMinTime]),Main[UniqueMinTime])=10000)

,BLANK()

,MINX(TOPN(1,TOPN(4,Main,Main[UniqueMinTime],1),Main[UniqueMinTime]),Main[UniqueMinTime]))

The first part of the measure contains an OR expression designed to remove two undesirable outcomes.

COUNTROWS(TOPN(4,Main,Main[UniqueMinTime],1))<4 returns the number of rows returned for each year (as applied in a row field shown below). Since 4 is used here as the 1st argument of the TOPN function, the expectation would be that 4 rows would be returned in the TOPN “table”. However, that is the case. If there are less than 4 records in the data table for a specific year, TOPN will still return that table, opening the door to deriving a result that is less than the 4th best performance.

The other argument of the OR function:

MINX(TOPN(1,TOPN(4,Main,Main[UniqueMinTime],1),Main[UniqueMinTime]),Main[UniqueMinTime])=10000)

prevents returning a result that was blocked by the UniqueMinTime calculated column when 10000 was inserted for preformances greater than the best performance.

The main part of the DAX measure:

MINX(TOPN(1,TOPN(4,Main,Main[UniqueMinTime],1),Main[UniqueMinTime]),Main[UniqueMinTime]))

uses nested TOPN functions to return one value which in this case is the 4th best performance.

Is it important to note here that the Nth value can be made dynamic in a couple of different ways (i.e. – disconnected slicers and one cell linked tables).

Now comes the important part of this article.

It is clear from the chart that the 4th best performance by a unique individual in the 400 meters has been trending up (worse) since the early 1990s, confirming my suspicion. The reason for this is currently, but it could be cleared up by some more data. That is a subject for another post.

Hope that you found this useful!

Filed under: Other ]]>

Say, for instance, that you have 4 sheets named A-D and on each there is a list with range of A1:E21. If you filter each list and use the following formula:

=SUMPRODUCT(SUBTOTAL(9,INDIRECT(“‘”&CHAR(ROW($97:$100))&”‘!C2:C21”)))

you will get the sum of each list for column C. The best part is that the sheets do not have to be contiguous.

It is important to note that a similar formula does not return a result, although you might expect it to.

=SUMPRODUCT(AGGREGATE(9,6,INDIRECT(“‘”&CHAR(ROW($97:$100))&”‘!C2:C21”)))

Filed under: Other Tagged: Excel, SUBTOTAL ]]>

By David Hager

A number of years ago (~16) Laurent Longre discovered that Excel formulas that calculated over 3D ranges could be made by using the INDIRECT function(see Issue #3).

https://dhexcel1.wordpress.com/2017/01/07/archive-of-excel-experts-e-letter-by-david-hager/

This formula was developed out of necessity, since many of the functions in Excel do not work with Excel’s built-in 3D cell range notation.

This methodology was refined to formulas of the general form:

=SUMPRODUCT(XXXIF(INDIRECT(“‘”&SOMETHING&”‘!cell_range”),criteria))

In its basic form, it was first developed sometime in the 2004-2005 time period, but it is unclear who was actually the first person to derive the “final” form.

A specific example of this

=SUMPRODUCT(COUNTIF(INDIRECT(“‘”&SOMETHING&”‘!B2:F3”),”<>”&””))

This article is not actually about how to use these 3D formulas. Rather, it is about the formula techniques that can be used to create multi-sheet range in the SOMETHING part of the formula.

In each example shown here, an actual formula/range can be used, or a defined name representing the formula/range can be used. In the following example, an array created by the ROW function can be used to return sheet tabs named as single digit numbers.

=SUMPRODUCT(COUNTIF(INDIRECT(“‘”&ROW($1:$4)&”‘!B2:F3”),”<>”&””))

Or in the defined name form:

MyNumberTab1 **=ROW($1:$4)**

=SUMPRODUCT(COUNTIF(INDIRECT(“‘”&MyNumberTab1&”‘!B2:F3”),”<>”&””))

It is important to note that this type of 3D formula has another inherent advantage over Excel’s normal 3D range formulas (i.e. – =SUM($1:$4!B2:F2). The tabs do not have to be contiguous for the formulas to function as intended/desired. If, for example, the sheet containing the 3D formulas was “between” sheet “1” and “3” and had entries in the cell range of that sheet, they would be included in the sum for an Excel-inherent 3D cell reference, but they are not for the INDIRECT 3D reference form.

Another formula returns an array of single letters from a-z.

**=CHAR(ROW($97:$122))**

So, using this in the INDIRECT formula will return the expected values for the specified formula from all sheets named a-z (26 sheets). Note that all 26 sheets have to exist for the formula to not return an error. Of course, this formula can be modified for an alphabet subset if necessary.

Another formula returns an array of months of the year, which is another popular choice for naming worksheet tabs.

=**TEXT(ROW($1:$12)&”-1″,”MMM”)**

All of the formula arrays mentioned in this article can be modified by concatenating a text string to the array. In this case, the following array returns 12 strings, starting with “Jan 2011”.

Months2011 **=TEXT(ROW($1:$12)&”-1″,”MMM”)&” 2011″**

The final example illustrates the simplest form of an array to be used: a simple cell range.

=**$A$1:$A$4**

Two modifications of this can be useful as well. The OFFSET function could be used to create a dynamic cell range that would expand or contract based on user input.

For cases where the name list is anticipated to be static, the cell range can be evaluated in the formula bar and the resulting array of tab names can be stored as a defined name.

MyTabs1={“John”;”Paul”;”George”;”Ringo”}

I hope that you found this discussion useful.

Filed under: Other Tagged: 3D, Excel, formulas, INDIRECT ]]>

First90:=CALCULATE(MIN(Table1[Date]),Table1[Max TemperatureF]>=90)

Here is a picture of the pivot table with that measure.

If you closely you can see the years that are missing data. Well, since that went so smoothly, I figured why not look up the first day of freezing for each year. So, my first attempt used the following formula:

First32:=CALCULATE(MIN(Table1[Date]),Table1[Min TemperatureF]<=32,MONTH(Table1[Date])>6)

I added the criteria MONTH(Table1[Date])>6 to look up only the first freezing temperature that was at the end of the year. The results are shown below:

Now, the missing data was easy to see (1979-1985), since no result was returned for the First90 measure and a bogus result was retuned for the First32 measure. However, some of the legitimate data also showed no result for the First32 measure (1986, 1987, 1994, and 2002). I had failed to realize that the first freeze of the winter may not be in the year where the winter started. In order to find a solution that did work the way I intended, to would have to take into account that the first freeze of the winter season could also be in the next calendar year.

I am not going to bore you with the details of the numerous times that my attempts to solve this problem ended up in failure. Also, I would not want to bias your attempts to come up with a better solution than I have, since I am sure that there is another one out there. The key to the solution is that I needed to create a custom time period to call “winter”, and it had to work in a pivot table with a year row field. Here is my solution:

I created two calculated fields, one for the dates at the beginning of the winter and one for the dates at the end of the winter. Realize that these may not work for datasets from anywhere in the world (and especially in the Southern Hemisphere).

[BeginYear]=DATE(YEAR(Table1[Date]),7,1)

[EndYear]=DATE(YEAR(Table1[Date])+1,6,30)

I then created another calculated column for the desired DAX formula (I could not get this to work as a measure, so feel free to extend this).

[FirstFreeze]=CALCULATE(MIN(Table1[Date]),ALL(Table1),Table1[Min TemperatureF]<=32,DATESBETWEEN(Table1[Date],Table1[BeginYear],Table1[EndYear]))

The results in the [FirstFreeze] column give a result for every day with valid data, so the field setting has to be set to Average to return the desired value. Further, this field cannot be aggregated as Average in the pivot table when the calculated column has a Date datatype, so in order to use it must be changed to decimal type in the DataModel and then back to Date by use the filed settings in the pivot table (hope that is clear) J.

When done, the resulting pivot table looks like this:

Now that you can see that the years that were missing the first freezing temperatures in the initial attempt now have populated.

HTH!

David Hager

Filed under: Other Tagged: DAX, Excel, PowerPivot ]]>

http://www.indeed.com/jobtrends?q=Excel+VBA+PowerPivot&l=&relative=1

Prior, to mid-July 2013, there were basically **zero **job postings based on those criteria. Then, the job postings grew significantly from that point to now. Obviously, this was long after the introduction of PowerPivot (~4 years), so what happened at this time? The following link is to a posting on the SQL Server blog on July 8, 2013.

This was the announcement of the introduction of Power BI. So, why would this announcement causing a “surge” of job postings base on searching for Excel, VBA, and PowerPivot? It is clear (to me) that there was(is) an expectation by the corporate world that Microsoft would implement a programming language (probably VBA) that would eventually be extended throughout PowerPivot (the DataModel object so far) and the rest of the Power BI offerings, creating the ability to build corporate, non-manual solutions using Excel as the hub.

I will be watching closely to see if this “indicator” gives any clues pertaining to the strengthening or weakening of this expectation.

Filed under: Other Tagged: Excel, Power BI, PowerPivot ]]>

1) There would be a basic form of Excel. It would NOT have any add-ins to enable. It would not have any enhancements beyond what exists today. It would work on any device. It would NOT include the Data Model. The new Office apps would work seamlessly with it. Without having any hard statistics, I am guessing that > 98% of Excel users outside of a work environment would be extremely happy with this product.

2) Office 365 – no changes – mainly for corporate use.

3) The new product would be **Power Excel**. Excel as it currently exists would be integrated with the new Power BI tools. The VBA object model would be expanded so that all of the BI “components” would be fully programmable/automatable inside SharePoint and with other Office products. It could toggle between SharePoint installed on corporate systems and SharePoint in the cloud. An app on any device could access and run Power Excel loaded on a server. The argument against VBA for enterprise applications has always been that the code was not secure and not compiled. Code in Power Excel files would be “protected” by SharePoint, thus making an outside programming solution unnecessary.

So, I would do this and make sure that my customers knew the details of my long-term plan so that they could make timely business decisions based on that information.

It’s probably obvious based on my comments here that I have no inside knowledge of what Microsoft intends to do in the future, but it is my hope that their vision is similar to this.

Filed under: Other Tagged: Excel, Power BI, Power Excel ]]>

Filed under: Other Tagged: Excel ]]>

Filed under: Other Tagged: conditional formatting, Excel ]]>

Filed under: Other Tagged: Excel ]]>

Filed under: Other Tagged: Excel, fill across worksheets, table ]]>

Filed under: Other Tagged: defined name formula, Excel, sparkline ]]>

Filed under: Other Tagged: Excel, sparkline ]]>

Filed under: Other Tagged: defined name formula, Excel, UDF ]]>

Filed under: Other Tagged: Excel, filter, sparklines, table ]]>

Filed under: Other Tagged: Advanced Filter, charting ]]>

Filed under: Other ]]>

I hope that I am not stepping on something that Chris has already done but not published. Anyway, in order to understand what I am presenting here, you will have to read Chris’s article and download his workbook to follow this.

The M script in the workbook uses one cell input tables to store the beginning and end dates to size the date table as desired. It would be nice to size the date table based on the date range of a fact table in the PowerPivot Data Model. This would be a table that is refreshed periodically and the date range of the fact table would change as a result. Instead of manually updating the one cell input tables after visually determining the minimum and maximum values of the column in the fact table containing the dates, the following technique could be used.

The first step is to create two measures to calculate the min and max values:

MinDateValue:=MIN(Fact[DateKey])

MaxDateValue:=MAX(Fact[DateKey])

Then, if you are not a MDX expert like Chris (and I am definitely not one), create a PowerPivot pivot table and add the two measures to the pivot table. Next, convert the pivot table to cube formulas by highlighting it and then select from the menu Pivottable Tools, Analyze, OLAP Tools, Convert To Formulas. If the upper left cell of your pivot table was cell A1, you will see the following CUBE formulas in A1 and A2 respectively:

=CUBEMEMBER(“ThisWorkbookDataModel”,”[Measures].[MinDateValue]”)

=CUBEVALUE(“ThisWorkbookDataModel”,A$1)

The next step is to create a cube formula that is independent of cell references, so by replacing A$1 in the 2^{nd} formula with the first formula, we obtain:

=CUBEVALUE(“ThisWorkbookDataModel”,

CUBEMEMBER(“ThisWorkbookDataModel”,”[Measures].[MinDateValue]”)

)

This formula will return the smallest date in the fact table. Repeating the steps for the max value gives this formula.

=CUBEVALUE(“ThisWorkbookDataModel”,CUBEMEMBER(“ThisWorkbookDataModel”,”[Measures].[MaxDateValue]”))

Now, by copying these formulas into the one cell input tables (in the Date Parameters worksheet in Chris’s workbook), a dynamic updating effect for the Data Model is created. When the fact table is updated through PowerPivot with new rows and the Power Query M script is run, the generated data table date range will sync with the date range of the fact table. Once again, thanks to Chris for leading the way in showing the possibilities of Power Query.

Filed under: Other Tagged: Power Query, PowerPivot ]]>

Filed under: Other Tagged: PowerPivot ]]>

Filed under: Other Tagged: Excel, Power Query ]]>

Filed under: Other Tagged: DAX, PowerPivot ]]>

http://cwebbbi.wordpress.com/2014/02/04/loading-power-query-m-code-from-text-files/

and by Dick Moffat’s articles on refreshable Data Model connections in Excel 2013

and

http://dmoffat.wordpress.com/2013/08/21/how-you-can-change-to-another-connection-type-in-powerpivot/

I have come up with a method to make PQ queries to the Excel 2013 Data Model dynamic and refreshable.

[BTW, in order to better understand this post, you might want to read the referenced articles at the links shown above before proceeding, because I sense that this article is not my best literary work]

Chris discovered that by using the M code Expression.Evaluate function, a PQ script stored in a text file can be read by PQ and applied as a query. I realized that if I could create a way for the text filename string to be picked from a list in Excel and read into PQ, I would have a dynamic and refreshable way to feed any PQ query into a single connection as per Dick’s example with native Excel queries.

To my knowledge, the only information that can be read from an Excel workbook by PQ resides in a table, so I made a single cell table (Table3) as shown below.

The PQ query that uses the text filename string is shown below.

Let

// Get filename from an Excel single cell table

QSource = Excel.CurrentWorkbook(){[Name=”Table3″]}[Content],

QText = QSource{0}[DynCell],

//Load M code from text file

Source = Text.FromBinary(File.Contents(QText)),

//Evaluate the code from the file as an M expression

EvaluatedExpression = Expression.Evaluate(Source, #shared)

in

EvaluatedExpression

By applying data validation to the single cell in Table3, the value in that cell can be changed based on the selection of a filename from the validation list (shown in column T in the Figure). In this example, cell P4 is the cell where the data (list) validation is applied. The goal is to trigger a calculate event when the value in that cell is changed, which will run the following procedure.

Private Sub Worksheet_Calculate()

If ActiveCell = Range(“p4″) Then

For Each conn In ThisWorkbook.Connections

conn.Refresh

Next

End If

End Sub

Unfortunately, changing a value in a cell based on a data validation list does not trigger a calculation of the worksheet. However, there is a kludgy trick that can be used to cause a calculation to occur. By placing the following formula in a cell (in this case F1, as shown in Fig. 1), the event procedure will run when the validation list is used in P4.

=COUNTA(P1:P5)

So, either of the two scripts stored in text files are run by selecting the filename string in P4 which ends up in QText in the main query. Essentially the same PQ script used in Chris’s post was used in this example (Table4, in Figure) for DynamicQuery1.txt. For the query DynamicQuery2.txt, I changed script slightly to:

let

Source = Excel.CurrentWorkbook(){[Name=”Table4”]}[Content],

GroupedRows = Table.Group(Source, {}, {{“Average of Sales”, each List.Average([Sales]), type number}}

in

GroupedRows

The process works equally well whether the query is loaded on a worksheet or directly into the Data Model. Since this refresh scenario is in a workbook designed to have only one connection, a generic macro is used in the refresh process. In more complex workbooks, the VBA procedure can obviously be crafted to selectively refresh only the “OmniQueries” present in the workbook.

Finally, although I have not tested this, it appears likely that this same methodology can be used with SQL statements in PQ in the manner described in this Microsoft article:

The SQL.Database M function shown in the figure at this link uses a SQL query string, which can likely be called by the Expression.Evaluate function using the same process described in this post.

Let me know if you find this technique useful, and thanks again to Chris and Dick for paving the road.

Filed under: Other Tagged: Data Model, Excel, Power Query ]]>

http://dailydoseofexcel.com/archives/2006/06/30/irregular-color-banding/

Although he had cited me when he used a formula I created about 20 years ago as part of his banding solution, I never saw the article because he had misspelled my name (Hagar instead of Hager) so it never came up in a search.

=ROUND(MOD(**SUM(1/COUNTIF($A$3:A3,$A$3:A3)),**2),2)=1

Anyway, I thought that his formula was very cool and it got me to thinking about how the same feature might be applied to a filtered list. I quickly realized that another formula for counting unique items would have to be used, since the “range” argument in the COUNTIF function has to be an actual range and cannot be an array. Luckily, I was able to remember that I had created another formula long ago to return unique items and this formula could accept arrays. Furthermore, I had already adapted this formula to work with a filtered list by using the SUBTOTAL formula invented by Laurent Longre shown at the link below (my old EEE publication on John Walkenbach’s site).

http://spreadsheetpage.com/index.php/eee/issue_no_20_july_8_2001/

So, I modified the SUBTOTAL formula shown below to include expanding ranges as per Dick’s formula.

define filtRange as:

=IF(SUBTOTAL(3,OFFSET($B$2:$B2,ROW($B$2:$B2)-MIN(ROW($B$2:$B2)),,1)),$B$2:$B2,””)

(where column B contains sorted information organized in blocks)

and replaced the “unique formula” used in his formula with one from the EEE article to come up with a truly powerful formula.

=ROUND(MOD(**SUM(N(IF(ISNA(MATCH(“”,filtRange,0)),MATCH($B$2:$B2,$B$2:$B2,0),IF(MATCH(filtRange,filtRange,0)=MATCH(“”,filtRange,0),0,MATCH(filtRange,filtRange,0)))=ROW($B$2:$B2)-MIN(ROW($B$2:$B2))+1))**,2),2)=1

Caveat: In fact, it is so powerful that it takes up an enormous amount of computing power when used on a large list, so use it with care.

It can be used directly as a conditional formatting formula or added as an additional column in the list, which would then be used with the conditional format (i.e. – =$D2).

As an example, the figure below would be the result before filtering:

and the next figure would be the result after filtering (5 & 7 filtered from result column):

I hope that this provides another useful bullet to your Excel formatting arsenal.

Filed under: Other Tagged: Excel, Unique ]]>

http://www.cpearson.com/Downloads/Downloads.aspx

Filed under: Other ]]>

http://spreadsheetpage.com/index.php/site/eee/issue_no_8_july_1_1999/

Filed under: Other ]]>

Filed under: Other ]]>

You can scale “in-cell charts” by using the following formula: |

where: |

data_point is the relative reference of the 1st point in the data_range |

data_range is the absolute horizontal reference of the data |

this_cell is the relative reference of the cell containing the formula |

Formula is not completely volatile, so you must press F9 after adjusting column widths. |

Scaling is not perfect (zooming affects it) but works OK. =REPT(“|”,(data_point*100/MAX(data_range))*CELL(“width”,this_cell)/(14+NOW()*0)) |

Filed under: Other ]]>